- A unique design allows connection to any male NPT pressure gauge connection using a pressure-assisted o-ring seal
- Pressure helps to seal the fitting better
- Stainless steel construction
- Made in USA
-
Connect Quick-test hoses to a male NPT pressure gauge. It allows one to connect a hose to a pressure gauge, calibrate it and remove it without a wrench or thread sealant.
-
Ideal for situations where frequent calibration of a DP transmitter using the bleeder port is required This unique fitting makes a metal to metal seat on the transmitter and a Quick-test hose can be attached on the other side Connects through the bleeder screw port on a DP transmitter Made in USA
-
Connect three hoses or a combination of 3 hoses, adapters and hand pumps or manifolds Durable forged construction Tee has full flow through each of the ports Made in USA
-
Connect a hose to an adapter that is in a hard to reach place Ideal for accessing pressure transmitter ports and other equipment that is hard to reach Position pressure gauges for easy reading Durable forged construction Made in USA
-
Connect to pressure gauges, pressure calibrators and adapters easily and quickly Position a pressure gauge for easy reading Connect a Quick-test hose to an adapter in hard to reach places Durable forged construction Made in USA
-
Connect a Quick-test hose directly to a DP transmitter using the bleeder port when the transmitter is not mounted on a 3 or 5 valve manifold or when the manifold is not easily accessible. This unique fitting makes a metal to metal seat on the transmitter and a Quick-test hose can be attached on the other side Connects through the bleeder screw port on a DP transmitter Made in USA
-
Make a bubble-tight seal on any Female NPT pressure device without using thread sealant or a wrench.
- A unique design allows connection to standard female NPT ports using a pressure-assisted o-ring seal
- Pressure helps to seal the fitting better
- Stainless steel construction
- Made in USA
-
Connect to any medium pressure connection Ideal for connecting to Autoclave Engineers, Butech, HIP or Parker Medium Pressure connections Connect to Crystal Engineering pressure gauges or pressure calibrators with Female CPF pressure connections Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses Made in USA
-
Connect a male 37° flare AN/JIC fitting to a Quick-test hose without a wrench
- A unique design allows connection to standard male 37° flare fitting using a pressure-assisted o-ring seal
- Pressure helps to seal the fitting better
- Stainless steel construction
- Made in USA
-
Excellent for safely connecting two Quick-test XT 10,000 psi hoses through an enclosure, truck, or panel wall Bulkhead seals so no liquid or moisture can get into a control panel or enclosure Use to connect a Quick-test XT hose on the inside of an enclosure to a Quick-test XT hose on the outside of the enclosure Will connect through a wall that is up to 0.5 in (1.3 cm) Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses Made in USA
-
Connects Female NPT to Quick-test XT 10,000 psi hoses for permanent installation
- Connect to pressure transmitters, EFMs, Flow Computers and other NPT devices under test using thread sealant for a permanent connection
- Cap and chains make calibration easy and quick by connecting and disconnecting without a wrench or thread sealant
- Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses
- Made in USA
-
Make calibrating pressure transmitters a snap by eliminating the need for thread sealant or wrenches when connecting to any female NPT connection
- A unique design allows connection to standard female NPT ports using a pressure-assisted o-ring seal
- Pressure helps to seal the fitting better
- A Cap and chain makes calibration easy and quick by connecting and disconnecting a hose without a wrench or thread sealant
- Stainless steel construction
- Made in USA
-
Connect to any Size Petes Plug for testing, sampling or reading a pressure. Connect from any Pete's Plug directly to a Ralston Quick-test hose, gauge or FieldLab for quick pressure testing "Pete's Plug" is a registered Trademark of Peterson Industries Made in USA
-
Use to slowly or quickly bleed pressure from a line after a calibration is complete Easily connect between the end of a Quick-test hose and the process connection Keep fluid or contaminates out of the hand pump, calibrator or nitrogen control device
-
Connect a Quick-test hose directly to a DP transmitter using the bleeder port when the transmitter is not mounted on a 3 or 5 valve manifold or when the manifold is not easily accessible. This unique fitting makes a metal to metal seat on the transmitter and a Quick-test XT hose can be attached on the other side Connects through the bleeder screw port on a DP transmitter Pressurize to 10,000 psi (700 bar) Made in USA
-
Connect a pressure gauge with Metric male parallel thread to a Quick-test hose A unique design allows connection to any male metric connections using a pressure-assisted o-ring seal Pressure helps to seal the fitting better Stainless steel construction Made in USA
-
Install between a pressure gauge and the process and isolate the process from the gauge to perform a calibration of the gauge. After completing the calibration open the valve and place the gauge on-line, all without blowing down the system. * Use whenever there is a gauge that needs frequent calibration or verification
-
Connect 3 Quick-test XT 10,000 psi hoses together without a wrench or thread sealant Durable forged construction Full flow through all ports Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses Made in USA
-
Make a bubble-tight connection to any Swagelok, Parker, Hoke, SSP, Tylok or equivalent tube fitting without a wrench to 15,000 psi
- An excellent solution for connecting to tube fittings for pressure calibration, gas sampling, pressure reading and testing
- A unique design that seals on an o-ring to prevent damage to a tube fitting
- Make and remake hundreds of times without over-tightening a tube fitting
- Made in USA
-
Connect to any CGA 580 cylinder valve without a wrench or thread sealant Use in the field when connecting a pressure regulator to a nitrogen cylinder Use when filling multiple gas bottles Made in USA
-
10,000 psi (689 bar) working pressure Microbore hoses that provide a very quick, low volume, high pressure way of connecting to any pressure instrumentation, hand pump, calibration source or device under test
- Low volume reduces the pumping effort or compressed gas usage in pressure calibration
- No thread sealant required – connect to adapters without wrenches, thread sealant or thread tape
- Bubble tight connections to 10000 psi (689 bar) with no moving parts reduces maintenance to almost zero
- Hose is hard to break and very flexible
- Adapt from hose to virtually any device under test with only one connection
- A corrosion resistant strain-relief on each hose end reduces wear and dramatically increases hose life
- Hose is not recommended for Helium or Argon applications
- Hose is pin-pricked for use in Natural Gas applications
- Quick-test XT hoses are NOT compatible with QTHA adapters. Please use XTHA adapters
- Made in USA
-
Connect one end to a Quick-test hose and the other to the process connection then turn the knob to control the pressure Easily control pressure of a closed system Fine tune pressure to a precise number Easily attach and remove from a system
-
Keep a calibration system pressurized with a fluid or gas while venting the pressure from the device being calibrated
-
Install in a test bench or control panel for easy access and control Non-rising stem vernier controls smoothly Floating piston head makes o-ring wear very low
-
Connect Quick-test XT hoses to a male NPT pressure gauge. It allows one to connect a hose to a pressure gauge, calibrate it and remove it without a wrench or thread sealant.
- A unique design allows connection to any male NPT pressure gauge connection using a pressure-assisted o-ring seal
- Pressure helps to seal the fitting better
- Stainless steel construction
- Made in USA
-
Connect a male 37° flare AN/JIC fitting to a Quick-test hose without a wrench
- A unique design allows connection to standard male 37° flare fitting using a pressure-assisted o-ring seal
- Pressure helps to seal the fitting better
- Stainless steel construction
- Made in USA
-
The most economical way of performing static pressure calibrations in the field using nitrogen or other compressed gas. Fine adjustment piston provides precise pressure control instead of trying to make adjustments with a pressure regulator and a needle valve Soft-seated valves make filling and venting the system very precise Compact design allows the manifold, gauge adapter and hoses to fit in the included nylon bag Because pressure is controlled at the device under test, the nitrogen cylinder can be mounted on a truck Low volume Quick-test hose, gauge adapter and process connection reduce gas usage and make nitrogen cylinders last longer Made in U.S.A.
-
DP0V (125 psi / 8.6 bar) pump, no gauge adapter, 3ft hose, 1/4" MNPT process connection
The ideal solution for very precise low pressure calibration or differential pressure testing using an external pressure calibrator as the reference.
- Light weight, compact pump generates up to 125 psi (8.6 bar) with ease
- Large volume fine adjustment piston provides precise control, even at very low pressures
- Modular design makes field maintenance quick and easy
- Precisely vent pressure with soft seated bleed valve
- Two outlet ports provide connections for both pressure reference and for device under test thus eliminating a tee
- Low volume Quick-test hose, gauge adapter and process connection can be attached to pump without thread sealant or a wrench
- Rugged, all metal construction reduces pressure changes due to temperature fluctuations
- Made in U.S.A.
Item Includes
- Hand Pump - DP0V Assembly (DP0V)
- Hose - Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long (QTQT-HOS-3ft)
- Hose Adapter - 1/4" male NPT x male Quick-test, no check-valve, brass (QTHA-2MB0)
-
DV0V (23 inHg / 650 mm Hg Vac) pump, no gauge adapter, with 3ft hose, 1/4" MNPT process conn. Generate vacuum to calibrate vacuum devices in the field Light weight, compact pump generates 23 inHg (584mm Hg)vacuum with ease Large volume fine adjustment piston provides precise control, even at very low vacuums Modular design makes field maintenance quick and easy Precisely vent pressure with soft seated bleed valve Two outlet ports provide connections for both pressure reference and for device under test thus eliminating a tee Low volume Quick-test hose, gauge adapter and process connection can be attached to pump without thread sealant or a wrench Rugged, all metal construction reduces pressure changes due to temperature fluctuations Made in U.S.A. Item Includes Hand Pump - DV0V Assembly (DV0V) Hose - Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long (QTQT-HOS-3ft) Hose Adapter - 1/4" male NPT x male Quick-test, no check-valve, brass (QTHA-2MB0)
-
Digital Pressure Gauge Benefits
Ease of Use
The Field Gauge LC10 was developed specifically for simplicity. It is compact in size, but with a large, easy-to-read display showing numbers and bar graphs clearly with a bright backlight for added visibility. The controls are clear and intuitive - there's no guesswork with the Field Gauge LC10. And it's powered by two low cost AA batteries which are easy to replace. Unlike analog gauges, it maintains calibration through shock, vibration, and abuse and will even stay calibrated if the battery dies.Versatility
The Field Gauge LC10 digital pressure gauge allows you to switch quickly and easily from among 15 standard engineering units. Similar products only allow two. And with the included FieldLab Desktop software, you can create custom engineering units, remove unneeded units, and configure other settings quicker and easier than ever. This allows you to truly customize the gauge to your needs, displaying only those units necessary for your application.Durability
Field Gauge LC10 digital gauges are built to last. It's waterproof up to 1 meter (IP67), and because it's digital, there are no mechanical parts that'll wear out and need to be replaced over time. Its rugged aluminum case and built-in screen protector keep the internal components safe, so you can toss it in your bag, drop it, or leave it out in the rain, and it will maintain its accuracy. Certificate of Calibration Not Included - To add Calibration please call with your order -
Piston sensed pressure reducing regulator for use in providing a stable pressure to precision pressure control devices. Outlet pressures up to 3000 psi (210 bar) Great for test stands and test benches Lighter than most other regulators on the market Can be panel mounted Smooth pressure adjustment with bronze bearing An excellent accessory for Ralston Instruments volume controllers, Nitropaks and calibration manifolds Made in USA
