-
Affordably Accurate! Featuring a 3 year recommended calibration interval, DNV approval, and an easy-to-use, time-saving user interface. The m1M digital pressure gauge maintains 0.25% of reading accuracy from -10 to 50°C. Accuracy is not affected by dropping, over-pressure, vibration, temperature, or rapid pressure change. Available as a 30 psi digital manometer. • 3-Year recommended calibration interval • Battery life up to 3 years continuous use • Bright backlit display • Easy to read extra-large numbers • Protective boot included • Shifts everyday wear to a replaceable CPF adapter
-
The HPC40 Series handheld pressure calibrator is the world's first combined pressure and mA loop calibrator to be fully temperature compensated from -20 to 50°C. You can count on the same accuracy whether measuring pressure, current, voltage, or temperature. • 0.035% of Reading Accuracy • Gauge, Absolute, and Differential Pressure to 15,000 psi / 1000 bar / 100 MPa • Advanced Simplicity "Non-Menu" Interface • Measure & Source mA with External Loop Power or Internal 24 VDC Power Supply • High Accuracy Thermometer with "True Ohm" Technology • Store & Recall Previously Used Screens • Flexible Power Options Including Rechargeable Combine the HPC40 Series with any of our ready to use pump systems, to provide a complete calibration kit.
-
Calibration lab in a box! This portable gauge and transmitter calibration system is 7 to 10 times faster than a deadweight tester. It allows you to do a 10 point up and down calibration in less than 3 minutes including printing out a calibration certificate. • Gauge / Chart recorder / Transmitter calibration system • 7 to 10 times faster than a deadweight tester • Reduce transcription / calculation errors • 0.1% of reading accuracy up to 15 000 psi (1000 bar) when using the XP2i as the reference or 0.05% of reading accuracy up to 5000 psi (300 bar) when using the 30 Series as the reference • Easy to use and install, wizards guide you through setup • Includes a weather-proof rolling case that can be used as a portable bench
Automated Gauge Calibration System. Pressure Standards are extra. Includes GaugeCalHP, FastCalXP, NPT CPF Fittings, Fine Adjust, Footswitch, Carrying Case, USB Adapter, and Rebuild Kit. -
Advanced Pressure Module The APM CPF Series portable pressure modules offer the functionality and flexibility to perform pressure calibrations with a multifunction process calibrator. Or, combine with a hand-held pressure calibrator to expand its range. The APM CPF delivers the same high level accuracy whether in the lab or in the field. • Accuracy to 0.025% of Reading • Temperature Compensated from -20 to 50°C • Integrated CPF Connection • Seven Ranges Available • Rugged Cast Aluminum Housing • Self-Contained, Intelligent Modules
-
The PK II floating ball type pneumatic dead weight tester is engineered to offer user-friendly, safe operation. The easy-to-use primary standard provides reliable and accurate pressure measurement in the field, or in a lab. • Accuracy to 0.015% of reading • Ranges to 30 psi • Available in psi, g/cm², bar, mbar, kPa, inH₂O, cmH₂O, and mmHg • Small incremental weight sets provide fractional output pressure Featuring a self-regulating design, that allows automatic stabilization of weights, eliminating the need to adjust input pressure. • Rugged ceramic measuring ball • Overhung weight carrier reduces side thrust and friction • Quick-leveling system for field use • Optional TripodLocal gravity and standard gravity (980.665 gals) versions available.**COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The Type T tester is a dead weight tester that offers laboratory accuracy in an instrument designed to withstand an industrial environment or daily stresses of a manufacturing environment. Each tester features a re-entrant type measuring piston and cylinder assembly. This design reduces the rate of fluid leakage and increases float time, helping to maintain accuracy as test pressures increase. • Accuracy to 0.015% of reading • Ranges to 15,000 psi • Available in psi, kg/cm², bar, and kPa • Small incremental weight sets available. A dual volume pumping feature allows a large volume of fluid to be added at low pressures to fill the system and increase pressure rapidly. Once filled, switch to a smaller volume to easy pumping and provide finer control at higher pressures. • Overhung weight carrier reduces side thrust and friction • Over-pressure protection prevents piston damage • 3- leg design with bulls-eye leveling system • Single and dual column versions available to meet a wide variety of applications **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
DP0V (125 psi / 8.6 bar) pump, no gauge adapter, 3ft hose, 1/4" MNPT process connection
The ideal solution for very precise low pressure calibration or differential pressure testing using an external pressure calibrator as the reference.
- Light weight, compact pump generates up to 125 psi (8.6 bar) with ease
- Large volume fine adjustment piston provides precise control, even at very low pressures
- Modular design makes field maintenance quick and easy
- Precisely vent pressure with soft seated bleed valve
- Two outlet ports provide connections for both pressure reference and for device under test thus eliminating a tee
- Low volume Quick-test hose, gauge adapter and process connection can be attached to pump without thread sealant or a wrench
- Rugged, all metal construction reduces pressure changes due to temperature fluctuations
- Made in U.S.A.
Item Includes
- Hand Pump - DP0V Assembly (DP0V)
- Hose - Quick-test 6900 psi hose, brass hose ends, 3 ft (92 cm) long (QTQT-HOS-3ft)
- Hose Adapter - 1/4" male NPT x male Quick-test, no check-valve, brass (QTHA-2MB0)
-
10,000 psi (689 bar) working pressure Microbore hoses that provide a very quick, low volume, high pressure way of connecting to any pressure instrumentation, hand pump, calibration source or device under test
- Low volume reduces the pumping effort or compressed gas usage in pressure calibration
- No thread sealant required – connect to adapters without wrenches, thread sealant or thread tape
- Bubble tight connections to 10000 psi (689 bar) with no moving parts reduces maintenance to almost zero
- Hose is hard to break and very flexible
- Adapt from hose to virtually any device under test with only one connection
- A corrosion resistant strain-relief on each hose end reduces wear and dramatically increases hose life
- Hose is not recommended for Helium or Argon applications
- Hose is pin-pricked for use in Natural Gas applications
- Quick-test XT hoses are NOT compatible with QTHA adapters. Please use XTHA adapters
- Made in USA
-
Connects Female NPT to Quick-test XT 10,000 psi hoses
- Ideal for connecting to pressure transmitters or other devices under test using thread sealant
- Quickly connect and disconnect Quick-test hoses for testing, calibrating and sampling
- Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses
- Made in USA
-
Make calibrating pressure transmitters a snap by eliminating the need for thread sealant or wrenches when connecting to any female NPT connection
- A unique design allows connection to standard female NPT ports using a pressure-assisted o-ring seal
- Pressure helps to seal the fitting better
- A Cap and chain makes calibration easy and quick by connecting and disconnecting a hose without a wrench or thread sealant
- Stainless steel construction
- Made in USA
-
Connects Female NPT to Quick-test XT 10,000 psi hoses for permanent installation
- Connect to pressure transmitters, EFMs, Flow Computers and other NPT devices under test using thread sealant for a permanent connection
- Cap and chains make calibration easy and quick by connecting and disconnecting without a wrench or thread sealant
- Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses
- Made in USA
-
Quickly connect a pressure calibrator or other pressure device with Female NPT connections a to Ralston hand pump or nitrogen calibration equipment to 10,000 psi
- Connect to any pressure calibrator or pressure module with Female NPT connections
- Allows the calibrator and pressure source to be easily disconnected and stored separately
- Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses
- Made in USA
-
Connect a Quick-test XT hose to an NPT pressure gauge or any Male NPT device using thread sealant and a wrench
- Connect to pressure gauges with NPT connections
- Adapt to a wide range of Male NPT process connections to 10,000 psi
- Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses
- Made in USA
-
Connect Male NPT pressure gauge or other Male NPT device to a Ralston hand pump or nitrogen calibration device to create one side of a quick-disconnect to 10,000 psi
- Install with thread tape once onto any male NPT pressure gauge then use the Quick-test connection to quickly connect or disconnect from any Ralston hand pump, nitrogen calibration device or other Quick-test adapter
- Saves the threads on a pressure gauge by not needing to make and remake the connection with thread sealant
- Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses
- Made in USA
-
Connect Quick-test hoses to a male NPT pressure gauge. It allows one to connect a hose to a pressure gauge, calibrate it and remove it without a wrench or thread sealant.
- A unique design allows connection to any male NPT pressure gauge connection using a pressure-assisted o-ring seal
- Pressure helps to seal the fitting better
- Stainless steel construction
- Made in USA
-
Connect Quick-test XT hoses to a male NPT pressure gauge. It allows one to connect a hose to a pressure gauge, calibrate it and remove it without a wrench or thread sealant.
- A unique design allows connection to any male NPT pressure gauge connection using a pressure-assisted o-ring seal
- Pressure helps to seal the fitting better
- Stainless steel construction
- Made in USA
