- Bulkhead seals so no liquid or moisture can get into a control panel or enclosure
- Use to connect tube fittings on the inside of an enclosure to a Quick-test hose on the outside of the enclosure
- Will connect through a wall that is up to 0.5 in (1.3 cm) thick
- Made in USA
-
Connect a Quick-test hose on one side of a panel, wall or enclosure and a tube fitting on the other
-
Connect a Quick-test hose to a pressure gauge or any device with a male NPT connection using thread sealant and a wrench
- Connect to pressure gauges with NPT connections
- Adapt to a wide range of Male NPT process connections
- Made in USA
-
Calibration tool box in the palm of your hand! The 30 Series is a wide range digital pressure calibrator that fits easily into your shirt pocket. Its internal sensors give you 0.05% of reading accuracy and resist damage from overpressure. • Wide pressure range can measure vacuum and pressure up to 5000 psi (300 bar) • Indicates milliamps to calibrate transmitters • Ultra compact and light • Very easy to learn and use • Battery operated • Brings laboratory accuracy to outdoor field conditions
-
The Ametek Crystal M1 is a digital pressure gauge with 0.2% of reading accuracy. It competes directly with mechanical gauges. Accuracy is not degraded by dropping, over-pressure, rapid pressure changes or temperatures between -10ËšC and 50ËšC.
-
The most economical way of performing static pressure calibrations in the field using nitrogen or other compressed gas. Fine adjustment piston provides precise pressure control instead of trying to make adjustments with a pressure regulator and a needle valve Soft-seated valves make filling and venting the system very precise Compact design allows the manifold, gauge adapter and hoses to fit in the included nylon bag Because pressure is controlled at the device under test, the nitrogen cylinder can be mounted on a truck Low volume Quick-test hose, gauge adapter and process connection reduce gas usage and make nitrogen cylinders last longer Made in U.S.A.
-
Connect to hoses, comparators and pressure references with Male Medium Pressure adapters Connect to Crystal Engineering CPF hoses and GaugeCal XP Comparators Connect to Medium pressure connections
-
Connect to any Medium Pressure connection Ideal for connecting to Autoclave Engineers, Butech, HIP or Parker Medium Pressure connections Connect to Crystal Engineering pressure gauges or pressure calibrators with Female CPF pressure connections Made in USA
-
Ideal for situations where frequent calibration of a DP transmitter using the bleeder port is required This unique fitting makes a metal to metal seat on the transmitter and a Quick-test hose can be attached on the other side Connects through the bleeder screw port on a DP transmitter Made in USA
-
DPPV (+125 psi to -23" Hg) pump, no gauge adapter, with 3ft hose, 1/4" MNPT process connection Generate either a vacuum or a pressure for calibrating low pressure or vacuum instrumentation using an external pressure calibrator. Features
- Generate either 125 psi (8.6 bar) pressure or 23 InHg (584 mm Hg) vacuum with the same pump
- Unique design allows the user to convert from pressure to vacuum by simply twisting a knob, even with gloves on
- Two outlet ports allow connection to reference pressure gauge or pressure calibrator as well as device under test, thus eliminating a tee
- Large volume fine adjustment piston provides precise control, even at very low pressures
- Precisely vent pressure with soft seated bleed valve
- Made in U.S.A.
-
• Portable, only 3.7 lb • Minimal maintenance • Increase and decrease pressure smoothly • Hand-tight quick connectors
-
The T-900 Series pneumatic hand pumps generate pressure and vacuum with precision and ease, allowing users to fine-tune the pressure delivered with every stroke. A built-in relief valve and dual pressure output enable safe and simple operation. The T-965 and T-975 are available with a button valve, making them capable of switching easily from pressure to vacuum generation • Vacuum & Pressure Range: -25 inHg to 30 psi or -27 inHg to 580 psi • Lightweight, compact design • Two outlet ports • Protected shuttle valve • Fine adjust sensitivity to 0.01 psi • Adjustable stroke • T-975-CPF model includes CPF hose and fittings
-
Connect a hose to an adapter that is in a hard to reach place Ideal for accessing pressure transmitter ports and other equipment that is hard to reach Position pressure gauges for easy reading Durable forged construction Made in USA
-
The first laboratory grade pressure reference made to work like you do - no matter where you do it. Speed through Calibration Tests With single button logging of both Device Under Test (DUT) and Reference readings, techs get completely digital logging of test points. Instant tolerance feedback at each point lets you know sooner than later whether to recalibrate. Work in Hazardous Locations No Matter How You Say It. What good is rugged mobility if you can't take your tools to where the job is? The FieldLab is certified Intrinsically Safe for hazardous locations anywhere in the world. Continuous Pressure Data Logging For general purpose data logging, the FieldLab can monitor pressure over short or very long periods of time at customized intervals. Customize Log Interval & Duration Long Term Field Monitor (3 months on single charge) 2 Million Data Points Onboard Storage Wellhead Monitoring Chart Recorder Replacement Download Log Data to FieldLab Desktop App Change Engineering Units With One Touch of a Button The FieldLab comes with every standard engineering unit used to measure pressure or vacuum. Swap units instantly without searching through menus. Customize the FieldLab to only show the Units you use most with the FieldLab Desktop App. Learn New Tricks with Test Modes FieldLab introduces a revolutionary way to plan and run tests through the FieldLab Test Modes. Easily create Test Modes for the work that needs to be done and how you want your data returned. Activate your custom Test Mode on your FieldLab to ensure repeatability and tracebility - every time you need to repeat a test. Share Test Modes with colleagues and save time managing work processes. Work in the real world Below freezing or above blazing - the FieldLab is designed for where you work. Spend less time onsite and get more tests done in an 8 hour day without tedious processes or pen and paper.
-
Make calibrating pressure transmitters a snap by eliminating the need for thread sealant or wrenches when connecting to any female NPT connection
- A unique design allows connection to standard female NPT ports using a pressure-assisted o-ring seal
- Pressure helps to seal the fitting better
- A Cap and chain makes calibration easy and quick by connecting and disconnecting a hose without a wrench or thread sealant
- Stainless steel construction
- Made in USA
-
Wally box gauge replacement! The WT version of the XP2i is designed to replicate the dimensions and pressure connections of the most common test gauges mounted in portable cases. It is a drop in replacement for a Wally Box Pressure Gauge.
-
An affordable panel mounted pressure gauge with high-end features, the new Ralston Instruments Field Gauge LC30 line of digital pressure gauges was designed with the user in mind. They are compact, tough, and reliable with customization options to help you simplify your work and get the job done quickly and accurately. Accuracy: ±0.1% full scale accuracy
