-
The most economical way of performing static pressure calibrations in the field using nitrogen or other compressed gas. Fine adjustment piston provides precise pressure control instead of trying to make adjustments with a pressure regulator and a needle valve Soft-seated valves make filling and venting the system very precise Compact design allows the manifold, gauge adapter and hoses to fit in the included nylon bag Because pressure is controlled at the device under test, the nitrogen cylinder can be mounted on a truck Low volume Quick-test hose, gauge adapter and process connection reduce gas usage and make nitrogen cylinders last longer Made in U.S.A.
-
Connect a Quick-test hose on one side of a panel, wall or enclosure and a tube fitting on the other
- Bulkhead seals so no liquid or moisture can get into a control panel or enclosure
- Use to connect tube fittings on the inside of an enclosure to a Quick-test hose on the outside of the enclosure
- Will connect through a wall that is up to 0.5 in (1.3 cm) thick
- Made in USA
-
Connect a Quick-test hose to a pressure gauge or any device with a male NPT connection using thread sealant and a wrench
- Connect to pressure gauges with NPT connections
- Adapt to a wide range of Male NPT process connections
- Made in USA
-
Calibration tool box in the palm of your hand! The 30 Series is a wide range digital pressure calibrator that fits easily into your shirt pocket. Its internal sensors give you 0.05% of reading accuracy and resist damage from overpressure. • Wide pressure range can measure vacuum and pressure up to 5000 psi (300 bar) • Indicates milliamps to calibrate transmitters • Ultra compact and light • Very easy to learn and use • Battery operated • Brings laboratory accuracy to outdoor field conditions
-
The Ametek Crystal M1 is a digital pressure gauge with 0.2% of reading accuracy. It competes directly with mechanical gauges. Accuracy is not degraded by dropping, over-pressure, rapid pressure changes or temperatures between -10ËšC and 50ËšC.
-
Connect to hoses, comparators and pressure references with Male Medium Pressure adapters Connect to Crystal Engineering CPF hoses and GaugeCal XP Comparators Connect to Medium pressure connections
-
Connect to any Medium Pressure connection Ideal for connecting to Autoclave Engineers, Butech, HIP or Parker Medium Pressure connections Connect to Crystal Engineering pressure gauges or pressure calibrators with Female CPF pressure connections Made in USA
-
Ideal for situations where frequent calibration of a DP transmitter using the bleeder port is required This unique fitting makes a metal to metal seat on the transmitter and a Quick-test hose can be attached on the other side Connects through the bleeder screw port on a DP transmitter Made in USA
-
DPPV (+125 psi to -23" Hg) pump, no gauge adapter, with 3ft hose, 1/4" MNPT process connection Generate either a vacuum or a pressure for calibrating low pressure or vacuum instrumentation using an external pressure calibrator. Features
- Generate either 125 psi (8.6 bar) pressure or 23 InHg (584 mm Hg) vacuum with the same pump
- Unique design allows the user to convert from pressure to vacuum by simply twisting a knob, even with gloves on
- Two outlet ports allow connection to reference pressure gauge or pressure calibrator as well as device under test, thus eliminating a tee
- Large volume fine adjustment piston provides precise control, even at very low pressures
- Precisely vent pressure with soft seated bleed valve
- Made in U.S.A.
-
Digital Pressure Gauge Benefits
Ease of Use
The Field Gauge LC10 was developed specifically for simplicity. It is compact in size, but with a large, easy-to-read display showing numbers and bar graphs clearly with a bright backlight for added visibility. The controls are clear and intuitive - there's no guesswork with the Field Gauge LC10. And it's powered by two low cost AA batteries which are easy to replace. Unlike analog gauges, it maintains calibration through shock, vibration, and abuse and will even stay calibrated if the battery dies.Versatility
The Field Gauge LC10 digital pressure gauge allows you to switch quickly and easily from among 15 standard engineering units. Similar products only allow two. And with the included FieldLab Desktop software, you can create custom engineering units, remove unneeded units, and configure other settings quicker and easier than ever. This allows you to truly customize the gauge to your needs, displaying only those units necessary for your application.Durability
Field Gauge LC10 digital gauges are built to last. It's waterproof up to 1 meter (IP67), and because it's digital, there are no mechanical parts that'll wear out and need to be replaced over time. Its rugged aluminum case and built-in screen protector keep the internal components safe, so you can toss it in your bag, drop it, or leave it out in the rain, and it will maintain its accuracy. Certificate of Calibration Not Included - To add Calibration please call with your order -
• Portable, only 3.7 lb • Minimal maintenance • Increase and decrease pressure smoothly • Hand-tight quick connectors
-
• Portable, only 5.7 lb
• Great stability and high resolution • Minimal maintenance • Hand-tight quick connectors -
The T-900 Series pneumatic hand pumps generate pressure and vacuum with precision and ease, allowing users to fine-tune the pressure delivered with every stroke. A built-in relief valve and dual pressure output enable safe and simple operation. The T-965 and T-975 are available with a button valve, making them capable of switching easily from pressure to vacuum generation • Vacuum & Pressure Range: -25 inHg to 30 psi or -27 inHg to 580 psi • Lightweight, compact design • Two outlet ports • Protected shuttle valve • Fine adjust sensitivity to 0.01 psi • Adjustable stroke • T-975-CPF model includes CPF hose and fittings
-
Piston sensed pressure reducing regulator for use in providing a stable pressure to precision pressure control devices. Outlet pressures up to 3000 psi (210 bar) Great for test stands and test benches Lighter than most other regulators on the market Can be panel mounted Smooth pressure adjustment with bronze bearing An excellent accessory for Ralston Instruments volume controllers, Nitropaks and calibration manifolds Made in USA
-
Perform both ultra-precise low pressure differential or high pressure static pressure calibrations with nitrogen using the same device. Self contained nitrogen source, regulator, precision fine adjust, hoses, gauge adapters and process connections provide a complete pressure control solution for doing nitrogen calibration of pressure instruments in remote locations. Self contained unit provides a precise nitrogen source for calibrating differential and static pressure instrumentation using an external pressure calibrator Proprietary pressure balanced fine adjustment piston allows for extremely precise, finger-tip control of pressure at 0.03 psi (2 mbar) or 3000 psi (210 bar) or any range in between. Easily refillable nitrogen cylinder holds enough gas for multiple calibrations Nylon bag to hold hose and fittings attached to inside of lid Includes storage compartment in control panel for pressure reference test gauge Low volume Quick-test hose, gauge adapter and process connection can be attached to NPAK without thread sealant or a wrench Designed to meet US Department of Transportation (DOT) and Canadian Transport Canada (TC) standards CE Approved for use in European Union - Designed to meet Pressure Equipment Directive (PED) and Transportable Pressure Equipment (TPED) standards Made in USA
-
Connect a hose to an adapter that is in a hard to reach place Ideal for accessing pressure transmitter ports and other equipment that is hard to reach Position pressure gauges for easy reading Durable forged construction Made in USA
