- Bulkhead seals so no liquid or moisture can get into a control panel or enclosure
- Use to connect tube fittings on the inside of an enclosure to a Quick-test hose on the outside of the enclosure
- Will connect through a wall that is up to 0.5 in (1.3 cm) thick
- Made in USA
-
Connect a Quick-test hose on one side of a panel, wall or enclosure and a tube fitting on the other
-
Connect a Quick-test hose directly to a DP transmitter using the bleeder port when the transmitter is not mounted on a 3 or 5 valve manifold or when the manifold is not easily accessible. This unique fitting makes a metal to metal seat on the transmitter and a Quick-test hose can be attached on the other side Connects through the bleeder screw port on a DP transmitter Made in USA
-
Connect to SAE/MS ports on pressure calibrators, pipelines and other processes Connect using an o-ring seal avoids issues with vibration, heating and cooling Excellent for aerospace and automotive connections with female SAE/MS ports Made in USA
-
Connects Female NPT to Quick-test XT 10,000 psi hoses
- Ideal for connecting to pressure transmitters or other devices under test using thread sealant
- Quickly connect and disconnect Quick-test hoses for testing, calibrating and sampling
- Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses
- Made in USA
-
Connect a Quick-test XT hose to an NPT pressure gauge or any Male NPT device using thread sealant and a wrench
- Connect to pressure gauges with NPT connections
- Adapt to a wide range of Male NPT process connections to 10,000 psi
- Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses
- Made in USA
-
Microbore hoses that provide a very quick, low volume, high pressure way of connecting to any pressure instrumentation, hand pump, calibration source or device under test
- Low volume reduces the pumping effort or compressed gas usage in pressure calibration
- No thread sealant required – connect to adapters without wrenches, thread sealant or thread tape
- Bubble tight connections to 6900 psi (475 bar) with no moving parts reduces maintenance to almost zero
- Hose is hard to break and very flexible
- Adapt from hose to virtually any device under test with only one connection
- Silver color dramatically reduces the effect that changing temperature has on pressure stability
- A corrosion resistant strain-relief on each hose end reduces wear and dramatically increases hose life
- Hose is excellent for inert gas applications (except Helium and Argon)
- Hose is pin-pricked for use in Natural Gas applications
- Made in U.S.A.
-
Connect to hoses, comparators and pressure references with Male Medium Pressure adapters Connect to Crystal Engineering CPF hoses and GaugeCal XP Comparators Connect to Medium pressure connections
-
Connect 2 Quick-test XT 10,000 psi hoses together quickly and easily Quick-test XT connection makes connecting two high pressure hoses together quick and easy Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses Made in USA
-
Quickly connect a pressure calibrator or other pressure device with Female NPT connections a to Ralston hand pump or nitrogen calibration equipment to 10,000 psi
- Connect to any pressure calibrator or pressure module with Female NPT connections
- Allows the calibrator and pressure source to be easily disconnected and stored separately
- Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses
- Made in USA
-
Connect Male NPT pressure gauge or other Male NPT device to a Ralston hand pump or nitrogen calibration device to create one side of a quick-disconnect to 10,000 psi
- Install with thread tape once onto any male NPT pressure gauge then use the Quick-test connection to quickly connect or disconnect from any Ralston hand pump, nitrogen calibration device or other Quick-test adapter
- Saves the threads on a pressure gauge by not needing to make and remake the connection with thread sealant
- Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses
- Made in USA
-
Connect a hose on one side of a panel, wall or enclosure with female NPT on the other side
- Bulkhead seals so no liquid or moisture can get into a control panel or enclosure
- Use to connect fittings on the inside of an enclosure to a Quick-test hose on the outside of the enclosure
- Will connect through a wall that is up to 0.5 in (1.3 cm) thick
- Made in USA
-
Connect to any Medium Pressure connection Ideal for connecting to Autoclave Engineers, Butech, HIP or Parker Medium Pressure connections Connect to Crystal Engineering pressure gauges or pressure calibrators with Female CPF pressure connections Made in USA
-
Connect a Female High Pressure 60 degree coned and threaded pressure fitting to a Quick-test hose Excellent for connecting to Autoclave Engineers, Butech, HIP (High Pressure Equipment), Parker or equivalent High Pressure coned and threaded connections, valves, tees and unions Metal to metal seal provides leak-free service Made in USA
-
Connect a Ralston Quick-test hose to a 1620 connection Adapt any Hydrotechnik Minimess or equivalent 16 x 2.0 connection to a Ralston Quick-test adapter Made in USA
-
Connect a Female 60 degree coned and threaded pressure fitting to a Quick-test XT 10,000 psi hose Excellent for connecting to Autoclave Engineers, Butech, HIP (High Pressure Equipment), Parker or equivalent High Pressure coned and threaded connections, valves, tees and unions Metal to metal seal for 10,000 psi service Note that these are not compatible with QT or QS hoses. Please use Quick-test XT hoses Made in USA
-
Connect to any male 37 degree flare adapter or tube
- Connect to male AN flare connections without a wrench
- Excellent for use in Aerospace and marine use
- Cap adapters off when not in use
- Made in USA
