• Our Multifunction Process Calibrator combines all your favorite features such as % error calculation, scaling, leak-testing, and switch calibrating into one multifunction process calibrator. • Large full color display • Advanced Simplicity user interface • Simultaneous read-back and fast RTD simulation • Connect an RTD to use as a high accuracy thermometer using “True Ohm” technology • Full numerical keypad with cursor and function keys • Recall saved tasks for both upper & lower windows • Fuseless Protection The multifunctions of the ASC-400 include: • Read and source RTD, Thermocouple, Current, Voltage, Frequency, Resistance, and Pulse Train Output • Calibrate gauge or absolute pressure when combined with an APM CPF pressure module • Calibrate temperature when combined with a dry block calibrator
  • 10-50 mA Multifunction Process Calibrator PIE 850 | Loop Diagnostics

     

    10-50 mA Multifunction Process Calibrator – mA • V • TC • Ohms • RTD • Hz • pH • Pressure

    • Lighten up your toolbox Compact calibrator replaces toolbox of single function devices
    • Technician friendly operation Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads.
    • Use it as a milliamp and voltage calibrator Source 0.000 to 24.000 mA, 0.000 to 50.000 mA, 00.00 to 10.250 VDC, -20.000 to 99.999 mV and -500.00 to 999.99 mV Read to 24.000/52.000 mA, 0.00 to 60.00 VDC, +/- 99.999 mV and +/- 999.99 mV Simulate 2 Wire transmitters Power up transmitters and loops(24 VDC @ 20 mA; 40 VDC @ 50 mA) with built in power supply Simplify HART hook ups with built in 250 ohm resistor
    • Troubleshoot Loop problems Quickly diagnose ground fault and current leakage with patented loop diagnostic technology(US Patent # 7,248,058)
    • Check all loop parameters at once with the LoopScope Simultaneously displays current, voltage and resistance to let you know the condition of a live loop. Finds problems with power supplies & loops with too many loads. Patented by PIE!
    • Calibrate directly in temperature (°C & °F) The PIE 850 works with the instruments you use. Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II) RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850) Copper 10 & 50 Ohm, Nickel 110 and 120 Ohm
    • Checkout flow and vibration systems Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz, & to 20.000 kHz
    • Troubleshoot loop & wiring problems Beep out connections with the built-in continuity checker
    • Simulate pH probes into transmitters & analyzers Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to +414.12 to -414.12 mV
    • Measure pressure with optional pressure modules 32 modules for gauge, differential, compound and absolute pressure
    • Easy to read Turn on the backlight & easily see the display in dark areas of the plant
    • Quickly set any three outputs plus automatic stepping & ramping Easily set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK™ switch. Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output between Zero and Span. Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds
    • Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability
    • Includes Rubber Boot, Deluxe Hands Free Carrying Case, Certified Test Data, 4 AA Lithium Ion batteries & mV/RTD Test Leads (020-0820)
  • Multifunction Diagnostic Process Calibrator PIE 830 | Two isolated channels

     

    Multifunction Dual Channel Process Calibrator mA • V • TC • Ohms • RTD • Hz • pH • Pressure

    First Multifunction calibrator with 5 troubleshooting tools including a universal transmitter:

    • 1 Detect hidden loop problems with Patented Current leak detection technology Quickly diagnose troublesome ground faults & current leakage with patented Loop Diagnostic technology. These problems are undetectable with other instruments!
    • 2 Check all loop parameters at once with the LoopScope Simultaneously displays current, voltage and resistance to let you know the condition of a live loop. Finds problems with power supplies & loops with too many loads. Patented by PIE!
    • 3 Automatically detect 2, 3 or 4 wire RTDs Trouble shoot sensor connections and find broken wires with patented technology. LCD indicates which of the four wires are connected to an RTD sensor.
    • 4 Swap out faulty transmitters to diagnose control issues Easily setup the 830 as a universal isolated transmitter for temperature, frequency, millivolt or pressure. If the loop is back under control you know the transmitter was faulty. Turn on the LoopScope to simultaneously see the loop current, power supply voltage and loop loads for troubleshooting.
    • 5 Troubleshoot wiring problems without a multimeter Built in continuity checker with beeper quickly finds broken wires or shorts in instrumentation wiring.
    • Lighten up your toolbox Pocket sized calibrator replaces toolbox of single function devices; dual channels allows for use of only 1 calibrator instead of 2!
    • Technician friendly operation Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads.
    • Use it as a milliamp and voltage calibrator Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC, -20.000 to 99.999 mV and -500.00 to 999.99 mV Read to 24.00 mA, 0.0 to 60.0 VDC, +/- 99.999 mV and +/- 999.99 mV Simulate 2 Wire transmitters Power up transmitters and loops with built in 24 V power supply Simplify HART hook ups with built in 250 ohm resistor
    • Calibrate directly in temperature (°C & °F) The PIE 830 works with the instruments you use. Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II) RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850) Copper 10 & 50 Ohm, Nickel 110 and 120 Ohm
    • Checkout flow and vibration systems Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz, & to 20.000 kHz
    • Simulate pH probes into transmitters & analyzers Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to +414.12 to -414.12 mV
    • Measure pressure with optional pressure modules 32 modules for gauge, differential, compound and absolute pressure
    • Quickly set any three outputs plus automatic stepping & ramping Easily set any value quickly with the adjustable “DIAL”; store any three output settings for instant recall with the EZ-CHECK™ switch. Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output between Zero and Span. Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds
    • Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability
    • Includes Rubber Boot, Deluxe Hands Free Carrying Case & mV/RTD Test Leads (020-0820)
  • Multifunction Diagnostic Calibrator PIE 820Elite | Loop Diagnostics

    Multifunction Diagnostic Process Calibrator – mA • V • TC • Ohms • RTD • Hz • pH • Pressure

    • Lighten up your toolbox Compact calibrator replaces toolbox of single function devices
    • Technician friendly operation Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads.
    • Use it as a milliamp and voltage calibrator Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC, -20.000 to 99.999 mV and -500.00 to 999.99 mV Read to 24.00 mA, 0.0 to 60.0 VDC, +/- 99.999 mV and +/- 999.99 mV Simulate 2 Wire transmitters Power up transmitters and loops with built in 24 V power supply Simplify HART hook ups with built in 250 ohm resistor
    • Troubleshoot Loop problems Quickly diagnose ground fault and current leakage with patented loop diagnostic technology(US Patent # 7,248,058)
    • Calibrate directly in temperature (°C & °F) The PIE 820Elite works with the instruments you use. Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II) RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850) Copper 10 & 50 Ohm, Nickel 110 and 120 Ohm
    • Checkout flow and vibration systems Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz, & to 20.000 kHz
    • Troubleshoot loop & wiring problems Beep out connections with the built-in continuity checker
    • Simulate pH probes into transmitters & analyzers Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to +414.12 to -414.12 mV
    • Measure pressure with optional pressure modules 32 modules for gauge, differential, compound and absolute pressure
    • Easy to read Turn on the backlight & easily see the display in dark areas of the plant
    • Quickly set any three outputs plus automatic stepping & ramping Easily set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK switch. Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output between Zero and Span. Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds
    • Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability
    • Includes Rubber Boot, Deluxe Hands Free Carrying Case & mV/RTD Test Leads (020-0820)
  • Multifunction Process Calibrator PIE 820 | 6 functions in 1 calibrator

    Multifunction Process Calibrator – mA • V • TC • Ohms • RTD • Hz

    • Lighten up your toolbox Pocket sized calibrator replaces toolbox of single function devices
    • Technician friendly operation Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads.
    • Use it as a milliamp and voltage calibrator Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC and 0.00 to 80.00 mV Read to 24.00 mA, 00.00 to 10.,25 VDC, 0.0 to 60.0 VDC, 00.00 to 80.00 mV Simulate 2 Wire transmitters Power up transmitters and loops with built-in 24 V power supply Simplify HART hook ups with built in 250 ohm resistor
    • Calibrate directly in temperature (°C & °F) The PIE 820 works with the instruments you use. Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II) RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850) Copper 10 & 50 Ohm, Nickel 110 and 120 Ohm
    • Checkout flow and vibration systems Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz, 20.000 kHz
    • Troubleshoot loop & wiring problems Beep out connections with the built-in continuity checker
    • Easy to read Turn on the backlight & easily see the display in dark areas of the plant
    • Quickly set any three outputs plus automatic stepping & ramping Easily set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK switch. Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output between Zero and Span. Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds
    • Includes Rubber Boot, Deluxe Hands Free Carrying Case & mV/RTD Test Leads (020-0820)

Title

Go to Top