• Calibration tool box in the palm of your hand! The 30 Series is a wide range digital pressure calibrator that fits easily into your shirt pocket. Its internal sensors give you 0.05% of reading accuracy and resist damage from overpressure. • Wide pressure range can measure vacuum and pressure up to 5000 psi (300 bar) • Indicates milliamps to calibrate transmitters • Ultra compact and light • Very easy to learn and use • Battery operated • Brings laboratory accuracy to outdoor field conditions
  • The first laboratory grade pressure reference made to work like you do - no matter where you do it. Speed through Calibration Tests With single button logging of both Device Under Test (DUT) and Reference readings, techs get completely digital logging of test points. Instant tolerance feedback at each point lets you know sooner than later whether to recalibrate. Work in Hazardous Locations No Matter How You Say It. What good is rugged mobility if you can't take your tools to where the job is? The FieldLab is certified Intrinsically Safe for hazardous locations anywhere in the world. Continuous Pressure Data Logging For general purpose data logging, the FieldLab can monitor pressure over short or very long periods of time at customized intervals. Customize Log Interval & Duration Long Term Field Monitor (3 months on single charge) 2 Million Data Points Onboard Storage Wellhead Monitoring Chart Recorder Replacement Download Log Data to FieldLab Desktop App Change Engineering Units With One Touch of a Button The FieldLab comes with every standard engineering unit used to measure pressure or vacuum. Swap units instantly without searching through menus. Customize the FieldLab to only show the Units you use most with the FieldLab Desktop App. Learn New Tricks with Test Modes FieldLab introduces a revolutionary way to plan and run tests through the FieldLab Test Modes. Easily create Test Modes for the work that needs to be done and how you want your data returned. Activate your custom Test Mode on your FieldLab to ensure repeatability and tracebility - every time you need to repeat a test. Share Test Modes with colleagues and save time managing work processes. Work in the real world Below freezing or above blazing - the FieldLab is designed for where you work. Spend less time onsite and get more tests done in an 8 hour day without tedious processes or pen and paper.
  • Our Multifunction Process Calibrator combines all your favorite features such as % error calculation, scaling, leak-testing, and switch calibrating into one multifunction process calibrator. • Large full color display • Advanced Simplicity user interface • Simultaneous read-back and fast RTD simulation • Connect an RTD to use as a high accuracy thermometer using “True Ohm” technology • Full numerical keypad with cursor and function keys • Recall saved tasks for both upper & lower windows • Fuseless Protection The multifunctions of the ASC-400 include: • Read and source RTD, Thermocouple, Current, Voltage, Frequency, Resistance, and Pulse Train Output • Calibrate gauge or absolute pressure when combined with an APM CPF pressure module • Calibrate temperature when combined with a dry block calibrator
  • The ETC Series is the ideal dry block temperature calibrator when time is the critical factor and the highest accuracy is not a requirement. The block heats up to 100°C per minute and stabilizes in just 3 minutes! The small size and light weight, fit perfectly in a tool box, making it the perfect field calibrator to verify sensors in difficult to reach places Rugged construction, featuring stainless steel and rubber side panels, make the instrument suitable for many years of service in an industrial environment. • Temperature range from -10 to 400°C (14 to 752°F) with 3 models • Accuracy to ± 0.5°C and Stability to ± 0.05°C • Time saving fast cooling and heating times • Easy-to-read multi-information display • Customizable stability checkmark with countdown timer • Set exact temperature desired to a resolution of 0.1°C • ETC 400R, small lightweight IR calibrator • Lightweight and easy to carry ETC-125A -10 to 125°C (14 to 257°F) ETC-400A 28 to 400°C (82 to 752°F) ETC-400R 28 to 400°C (82 to 752°F)  
  • REED R5002 High Voltage Insulation Tester

    Model: R5002 | UPC: 800837001191

    Test voltages up to 5kV and measure insulation resistance up to 60GΩ.

  • REED R5820 Loop Calibrator

    Model: R5820 | UPC: 800837002709

    This loop calibrator features mA sourcing, simulation and measurement. It has a 24V loop power supply and selectable step or ramp outputs.

  • REED R2810 Thermocouple Calibrator

    Model: R2810 | UPC: 800837001146

    This Thermocouple Calibrator is capable of sourcing and measuring 8 different types of thermocouples. The R2810 features a large easy-to-read LCD display, a basic accuracy of 0.05% and includes the essentials to test and calibrate your temperature sensors.

  • REED R5010 True RMS Digital Multimeter

    Model: R5010 | UPC: 800837001269

    True RMS waterproof multimeter with 40,000 count backlit LCD display.

  • REED R5005 True RMS Industrial Multimeter with Bluetooth

    Model: R5005 | UPC: 800837001221

    Full-featured waterproof DMM capable of data logging and measuring multiple True RMS AC and DC signals simultaneously. Features a 50000 count 320 x 240 TFT color LCD display with digital analog bargraph and Bluetooth capability.

  • REED R5030 500A True RMS AC/DC Clamp Meter with NCV

    Model: R5030 | UPC: 800837001283

    Compact AC/DC clamp meter with backlit display, built-in non-contact voltage (NCV) detector and contact thermometer.

    • Automated and self-contained pressure generation and control to 1,000 psi ( 70 bar)
    • Standard accuracy to 0.02%FS
    • Optional precision accuracy models to 0.01%FS
    • Two removable internal pressure modules for multi-range selection
    • Control stability to 0.003%FS
    • Portable, designed for use in the field and in the lab
    • Ability to measure two external pressure modules
    • Wi-Fi, Bluetooth, USB and Ethernet communication
    • HART and profibus communication
    • Data logging and task management
    • Patented electric pump technology and improved speed
  • • Portable,rugged, and quick to temperature
    • Metrology-level performance in stability, uniformity,accuracy and loading effect • Dual-zone control • Process calibrator option provides a multi-channel readout for a reference thermometer,RTDs and TCs,task documentation, and HART Communication • Color touch screen display • Choose your own range option • Set point control by reference • Self-calibration feature • ISO 17025-accredited calibration w/data included **COST WILL VARY BASED ON CONFIGURATION - PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • Diagnostic Temperature & mA Calibrator PIE 525Plus | RTD , Thermocouple and loop calibrator

    • Three Calibrators in One! Calibrate all your Thermocouple, RTD instruments AND your milliamp loops with the PIE 525Plus. It has all the functions of a 12 type RTD calibrator, 14 type thermocouple calibrator and can source 0 to 24 milliamps or simulate a two wire transmitter like a milliamp calibrator. You may also perform stand alone calibrations of two wire transmitters by simultaneously supplying the RTD or thermocouple input signal while supplying the 24 volts to power up the transmitter and monitoring the milliamp output signal. Powers HART™ transmitters with built-in 250 ohm resistor simplifying hookups with HART communicators.
    • Troubleshoot loop problems Quickly diagnose ground fault and current leakage with the patented loop diagnostic technology (US Patent# 7,248,058)
    • Calibrate directly in temperature (°C & °F) Stop carrying around a decade box and RTD resistance tables. The PIE 525Plus works with the RTDs you use including Platinum 10, 50, 100, 200, 500 & 1000 Ohm (alpha = 3850), Platinum 100 Ohm (alpha = 3902, 3916, 3926), Copper 10 & 50 Ohm, and Nickel 120 Ohm. Or calibrate from 0.000 to 400.000 and 0.00 to 4000.00 Ohms. For RTDs the fixed or pulsed sensor current is measured by the calibrator.   Have thermocouples  also?  Choose from  J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) or P (Platinel).  Or calibrate from 13.000 to 80.000 mV
    • Measure RTD sensors Trouble shoot sensor connections and find broken wires with patented technology. Connect your two, three or four wire RTDs and the PIE 525Plus automatically detects the connections and measures the RTD in degrees C or F. Secondary display shows the resistance value corresponding to the RTD temperature. No competitor’s calibrator is compatible with as many process instruments; also displays excitation current to confirm your RTD transmitter is working properly.
    • Calibrate thermocouple instruments with lab accuracy and stability The internal cold junction thermistor is accurate to ±0.05°C and is traceable to NIST. The sensor is thermally bonded to an isothermal mass including brass blocks with screw terminals for connection of bare thermocouple wires along with a miniature thermocouple connector for fast connections. An extremely stable voltage reference and low drift components make it more accurate than most other handheld & benchtop thermocouple calibrators. The PIE 525Plus is capable of meeting the requirements of an AMS 2750 Field Test Instrument when certified by an accredited laboratory.
    • Replace thermocouples before costly failures Troubleshoot thermocouple probes by measuring the resistance of the cables and sensing element, allowing you to replace high resistance probes before they burn out.  Open thermocouples and ones with impending failure are indicated by  “OPEN TC” and the resistance value on the 525Plus display.
    • Checkout all your 4 to 20 mA loops & instruments With the built-in milliamp calibrator you can check, calibrate and measure all your current signal instruments in a 4 to 20 milliamp loop. It can be used at any access point in your loop. Source & Read 0.000 to 24.000 mA, Simulate a 2 Wire Transmitter or use the PIE 525Plus to simultaneously power your 2 Wire Transmitter and measure its output while simulating the sensor input.
    • Fast calibration with automatic output stepping Choose between 2, 3, 5, 11 and 21 steps to automatically increment the output in 100%, 50%, 25%, 10% or 5% of span. Select the step time to match your system from 5, 6, 7, 8, 9, 10, 15, 20, 25, 30 and 60 seconds.
    • Optional Accessories Magnet strap(020-0236) J,K,T & E thermocouple wire kit(020-0202) B,R/S &N thermocouple wire kit(020-0203)
  • The CTC Series portable temperature calibrator is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2201°F) with 6 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations • Rugged, portable temperature calibrator ** PRICING BASED ON CONFIGURATION - REQUEST A QUOTE FOR ACTUAL PRICE **
  • The HPC50 handheld pressure calibrator is an intrinsically safe, dual pressure calibrator with options to add an additional two external pressure or temperature modules. The HPC50 pressure calibrator combines the features you love from the HPC40 with improvements like, better battery life an improved display, an extra external module connection, and of course intrinsic safety. The HPC50 series pressure calibrator is fully temperature compensated for pressure, temperature, and electrical measurements from -20 to 50C. • 0.035% of Reading Accuracy • Gauge, Absolute, and Differential Pressure to 15,000 psi / 1000 bar / 100 MPa • Advanced Simplicity "Non-Menu" Interface • Measure Sink mA and V • High Accuracy Thermometer with "True Ohm" Technology • Store & Recall Previously Used Screens Combine the HPC50 Series with any of our ready to use pump systems, to provide a complete calibration kit.
  • Fast, portable, and easy – generate pressure to 15 000 psi The GaugeCalHP (System G) is a portable, self-contained, hydraulic pressure generator for calibrating pressure gauges, transmitters, sensors, and safety valves. It’s much faster than deadweight testers and most automated pressure controllers; and it’s so quick and easy to use, it’s ideal for calibrating those low cost gauges that are often overlooked for ISO9000 compliance. • Pressure to 15 000 psi / 1000 bar / 100 MPa • Vacuum to -12.5 psi / -0.8 bar / -86 kPa Use without fluid to generate up to 400 “H2O (995 mbar) to within 0.01 inches (0.025 mbar). Makes calibrating differential pressure transmitters easy. • Easily test large size gauges with the unique pivoting manifold • Quickly bleed air and capture fluid with the no mess drip tray • Gauge-safe integral venting system prevents damage to mechanical gauges • Use with water, light oil, or air
Go to Top