-
Sale!The Crystal XP2i is The World’s Most Popular Test Gauge! The Crystal XP2i is Ultra rugged, intrinsically safe, digital test gauge and is available with 0.1% of reading, 0.02% of full scale, or 0.05% of full scale accuracy levels.
-
CPF Fittings and Hose are a new line of quick-test pressure fittings for calibration and test applications -- designed with an emphasis on safety. Crystal Pressure Fittings (CPF) perform up to 15 000 psi / 1000 bar, and feature a safety weep hole to alert you before you accidentally disconnect from a pressurized system. It can also be used as a bleed point. Each fitting is machined in 316 Stainless Steel and laser markings indicate the fitting type, size, part number, and Maximum Allowable Working Pressure to prevent a mismatched connection. An industry-first patented o-ring connection allows CPF Fittings to maintain a leak-free seal up to 10 000 psi with only finger-tightening. This offers an alternative to commonly-used NPT Fittings, which require technicians to wrap their fittings in thread tape and use a wrench to tighten each installation. Unlike other quick-change fittings, the O-rings in CPF Fittings are also easily replaceable. CHECK ITEM DESIRED AND CHOOSE QUANTITY TO THE LEFT OF LINE ITEM FOR EACH ITEM THAT IS BEING ORDERED
-
Calibration tool box in the palm of your hand! The 30 Series is a wide range digital pressure calibrator that fits easily into your shirt pocket. Its internal sensors give you 0.05% of reading accuracy and resist damage from overpressure. • Wide pressure range can measure vacuum and pressure up to 5000 psi (300 bar) • Indicates milliamps to calibrate transmitters • Ultra compact and light • Very easy to learn and use • Battery operated • Brings laboratory accuracy to outdoor field conditions
-
The Ametek Crystal M1 is a digital pressure gauge with 0.2% of reading accuracy. It competes directly with mechanical gauges. Accuracy is not degraded by dropping, over-pressure, rapid pressure changes or temperatures between -10ËšC and 50ËšC.
-
The T-900 Series pneumatic hand pumps generate pressure and vacuum with precision and ease, allowing users to fine-tune the pressure delivered with every stroke. A built-in relief valve and dual pressure output enable safe and simple operation. The T-965 and T-975 are available with a button valve, making them capable of switching easily from pressure to vacuum generation • Vacuum & Pressure Range: -25 inHg to 30 psi or -27 inHg to 580 psi • Lightweight, compact design • Two outlet ports • Protected shuttle valve • Fine adjust sensitivity to 0.01 psi • Adjustable stroke • T-975-CPF model includes CPF hose and fittings
-
Wally box gauge replacement! The WT version of the XP2i is designed to replicate the dimensions and pressure connections of the most common test gauges mounted in portable cases. It is a drop in replacement for a Wally Box Pressure Gauge.
-
The HPC50 handheld pressure calibrator is an intrinsically safe, dual pressure calibrator with options to add an additional two external pressure or temperature modules. The HPC50 pressure calibrator combines the features you love from the HPC40 with improvements like, better battery life an improved display, an extra external module connection, and of course intrinsic safety. The HPC50 series pressure calibrator is fully temperature compensated for pressure, temperature, and electrical measurements from -20 to 50C. • 0.035% of Reading Accuracy • Gauge, Absolute, and Differential Pressure to 15,000 psi / 1000 bar / 100 MPa • Advanced Simplicity "Non-Menu" Interface • Measure Sink mA and V • High Accuracy Thermometer with "True Ohm" Technology • Store & Recall Previously Used Screens Combine the HPC50 Series with any of our ready to use pump systems, to provide a complete calibration kit.
-
- Log 500,000 points at up to 10 readings per/s
- Interactive real-time graphing of measurements
- Quick-change module bays
- 15,000 psi (1000 bar, 100MPa) pressure
- Pt100 RTD temperature
- Voltage (28VDC), current (55mA), & switch test
- Switch to absolute pressure with BARO option
- IP67 rated enclosure & drop tested from 5ft
-
A rugged Wet/Wet Differential! Ultra rugged, intrinsically safe, Differential Pressure Gauge with 0.1% of reading accuracy, capable of continuous vacuum measurement.
-
Fast, portable, and easy – generate pressure to 15 000 psi The GaugeCalHP (System G) is a portable, self-contained, hydraulic pressure generator for calibrating pressure gauges, transmitters, sensors, and safety valves. It’s much faster than deadweight testers and most automated pressure controllers; and it’s so quick and easy to use, it’s ideal for calibrating those low cost gauges that are often overlooked for ISO9000 compliance. • Pressure to 15 000 psi / 1000 bar / 100 MPa • Vacuum to -12.5 psi / -0.8 bar / -86 kPa Use without fluid to generate up to 400 “H2O (995 mbar) to within 0.01 inches (0.025 mbar). Makes calibrating differential pressure transmitters easy. • Easily test large size gauges with the unique pivoting manifold • Quickly bleed air and capture fluid with the no mess drip tray • Gauge-safe integral venting system prevents damage to mechanical gauges • Use with water, light oil, or air
-
Type T hydraulic comparator (System F) is a self-contained high volume pressure source capable of producing pressure up to 15 000 psi. It is ideal for testing gauges and setting hydraulic relief valves and pressure switches. Multiple models are available for hydraulic oil, water, or both. • Pressure Range: 0 to 15 000 psi • High and low volume settings • Two outlet ports • Large fluid capacity • Fine adjustment up to 3500 psi • Compatible with water and oil • T-1-CPF includes CPF fittings
-
The P014 hydraulic jack pump (System E) is an extremely effective pressure pump designed for easy, controlled, high pressure generation. Each comparator includes a 4 connection manifold, which can be used for the reference indicator, the device under test, a fine adjust, an isolation valve, or a fluid reservoir. The adjustable reference pressure port lets you set your reference gauge at the best viewing angle. • Pressure Range: 0 to 10 000 psi / 700 bar • Easy to use fine adjust • Adjustable reference port • Eliminate / Bleed air with CPF fittings • Portable or permanent bench mounting
-
The P-Series (System D) comparators are hydraulic screw pumps designed for easy, controlled, high pressure generation. Each comparator includes a 4 connection manifold, which can be used for the reference indicator, the device under test, a fine adjust, an isolation valve, or a fluid reservoir. The adjustable reference pressure port lets you set your reference gauge at the best viewing angle. Three models are available for hydraulic oil, water, or both. • Pressure Range: 0 to 5000 psi / 350 bar • Easy to use fine adjust • Adjustable reference port • Eliminate / Bleed air with CPF fittings • Portable or permanent bench mounting • P-018-CPF  includes CPF fittings
-
The T-600 Series is a lightweight and portable hydraulic hand pump, specifically designed for high pressure applications. A fine adjust allows precise control of pressure, while a vent valve provides quick and positive shut-off and pressure release. The pumps are compatible with petroleum-based oils or hydraulic fluids. • High Pressure Range: 0 to 5000 psi • Easy to use fine adjust • Two outlet ports • Large reservoir • Eliminate / Bleed air with CPF fittings • T-620H-CPF includes CPF hose and fittings TO ORDER ACCESSORIES AND REPLACEMENT PARTS ONLY SELECT "NONE" FOR YOUR PUMP SELECTION
-
Advanced Pressure Module The APM CPF Series portable pressure modules offer the functionality and flexibility to perform pressure calibrations with a multifunction process calibrator. Or, combine with a hand-held pressure calibrator to expand its range. The APM CPF delivers the same high level accuracy whether in the lab or in the field. • Accuracy to 0.025% of Reading • Temperature Compensated from -20 to 50°C • Integrated CPF Connection • Seven Ranges Available • Rugged Cast Aluminum Housing • Self-Contained, Intelligent Modules
-
Calibration lab in a box! This portable gauge and transmitter calibration system is 7 to 10 times faster than a deadweight tester. It allows you to do a 10 point up and down calibration in less than 3 minutes including printing out a calibration certificate. • Gauge / Chart recorder / Transmitter calibration system • 7 to 10 times faster than a deadweight tester • Reduce transcription / calculation errors • 0.1% of reading accuracy up to 15 000 psi (1000 bar) when using the XP2i as the reference or 0.05% of reading accuracy up to 5000 psi (300 bar) when using the 30 Series as the reference • Easy to use and install, wizards guide you through setup • Includes a weather-proof rolling case that can be used as a portable bench
Automated Gauge Calibration System. Pressure Standards are extra. Includes GaugeCalHP, FastCalXP, NPT CPF Fittings, Fine Adjust, Footswitch, Carrying Case, USB Adapter, and Rebuild Kit.
