-
The T-600 Series is a lightweight and portable hydraulic hand pump, specifically designed for high pressure applications. A fine adjust allows precise control of pressure, while a vent valve provides quick and positive shut-off and pressure release. The pumps are compatible with petroleum-based oils or hydraulic fluids. • High Pressure Range: 0 to 5000 psi • Easy to use fine adjust • Two outlet ports • Large reservoir • Eliminate / Bleed air with CPF fittings • T-620H-CPF includes CPF hose and fittings TO ORDER ACCESSORIES AND REPLACEMENT PARTS ONLY SELECT "NONE" FOR YOUR PUMP SELECTION
-
The Type T tester is a dead weight tester that offers laboratory accuracy in an instrument designed to withstand an industrial environment or daily stresses of a manufacturing environment. Each tester features a re-entrant type measuring piston and cylinder assembly. This design reduces the rate of fluid leakage and increases float time, helping to maintain accuracy as test pressures increase. • Accuracy to 0.015% of reading • Ranges to 15,000 psi • Available in psi, kg/cm², bar, and kPa • Small incremental weight sets available. A dual volume pumping feature allows a large volume of fluid to be added at low pressures to fill the system and increase pressure rapidly. Once filled, switch to a smaller volume to easy pumping and provide finer control at higher pressures. • Overhung weight carrier reduces side thrust and friction • Over-pressure protection prevents piston damage • 3- leg design with bulls-eye leveling system • Single and dual column versions available to meet a wide variety of applications **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The PK II floating ball type pneumatic dead weight tester is engineered to offer user-friendly, safe operation. The easy-to-use primary standard provides reliable and accurate pressure measurement in the field, or in a lab. • Accuracy to 0.015% of reading • Ranges to 30 psi • Available in psi, g/cm², bar, mbar, kPa, inH₂O, cmH₂O, and mmHg • Small incremental weight sets provide fractional output pressure Featuring a self-regulating design, that allows automatic stabilization of weights, eliminating the need to adjust input pressure. • Rugged ceramic measuring ball • Overhung weight carrier reduces side thrust and friction • Quick-leveling system for field use • Optional TripodLocal gravity and standard gravity (980.665 gals) versions available.**COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The CTC Series is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2200°F) with 6 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations CTC-660 A 28 to 660°C (82 to 1220°F) CTC-660 C 28 to 660°C (82 to 1220°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The CTC Series portable temperature calibrator is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2201°F) with 5 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Calibrate Long Sensors with the CTC-652s 190 mm immersion depth • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations • Rugged, portable temperature calibrator **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The CTC Series is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2200°F) with 6 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations CTC-350 A 28 to 350°C (82 to 662°F) CTC-350 C 28 to 350°C (82 to 662°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The CTC Series is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2200°F) with 6 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations CTC-155 A -25 to 155°C (-13 to 311°F) CTC-155 C -25 to 155°C (-13 to 311°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The PTC Series matches lab features like, a wide temperature range, high accuracy, stability, and speed with our well-known, long lasting quality into a single industrial calibrator. Three models are available, from the basic unit to a full model including signal inputs and external reference sensor. The PTC Series features an active dual zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -90 to 660°C (-130 to 1220°F) with 4 models • Accuracy to ± 0.06°C and Stability to ± 0.01°C • Clean Dry block calibrator • Time saving fast cooling and heating times (350° in only 7 minutes) • “Plug and Play” intelligent reference sensors • Easy-to-read color display • Intuitive, fast, user-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software PTC-660 33 to 660°C (91 to 1220°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The PTC Series matches lab features like, a wide temperature range, high accuracy, stability, and speed with our well-known, long lasting quality into a single industrial calibrator. Three models are available, from the basic unit to a full model including signal inputs and external reference sensor. The PTC Series features an active dual zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -90 to 660°C (-130 to 1220°F) with 4 models • Accuracy to ± 0.06°C and Stability to ± 0.01°C • Clean Dry block calibrator • Time saving fast cooling and heating times (350° in only 7 minutes) • “Plug and Play” intelligent reference sensors • Easy-to-read color display • Intuitive, fast, user-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software PTC-350 33 to 350°C (91 to 662°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The PTC Series matches lab features like, a wide temperature range, high accuracy, stability, and speed with our well-known, long lasting quality into a single industrial calibrator. Three models are available, from the basic unit to a full model including signal inputs and external reference sensor. The PTC Series features an active dual zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -90 to 660°C (-130 to 1220°F) with 4 models • Accuracy to ± 0.06°C and Stability to ± 0.01°C • Clean Dry block calibrator • Time saving fast cooling and heating times (350° in only 7 minutes) • “Plug and Play” intelligent reference sensors • Easy-to-read color display • Intuitive, fast, user-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software PTC-155 -25 to 155°C (-13 to 311°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The PTC Series matches lab features like, a wide temperature range, high accuracy, stability, and speed with our well-known, long lasting quality into a single industrial calibrator. Three models are available, from the basic unit to a full model including signal inputs and external reference sensor. The PTC Series features an active dual zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -90 to 660°C (-130 to 1220°F) with 4 models • Accuracy to ± 0.06°C and Stability to ± 0.01°C • Clean Dry block calibrator • Time saving fast cooling and heating times (350° in only 7 minutes) • “Plug and Play” intelligent reference sensors • Easy-to-read color display • Intuitive, fast, user-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software PTC-125 -90 to 125°C (-130 to 257°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
Our most advanced and accurate temperature calibrator with the widest available temperature range. One of its great features is the patent pending DLC system for perfect temperature uniformity in the insert – even when calibrating large sensors or many sensors at a time. The RTC Series also feature active dual- and triple-zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -100 to 700°C (-148 to 1292°F) with 6 models • Accuracy to ± 0.04°C and Stability to ± 0.005°C • Dry block and liquid bath / dry block combined • Time saving fast cooling and heating times • Contamination free calibration of clamp sensors • “Plug and Play” intelligent reference sensors • Easy-to-read color display with User-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software RTC-700 33 to 700°C (91 to 1292°F), Dry Block. **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
Our most advanced and accurate temperature calibrator with the widest available temperature range. One of its great features is the patent pending DLC system for perfect temperature uniformity in the insert – even when calibrating large sensors or many sensors at a time. The RTC Series also feature active dual- and triple-zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -100 to 700°C (-148 to 1292°F) with 6 models • Accuracy to ± 0.04°C and Stability to ± 0.005°C • Dry block and liquid bath / dry block combined • Time saving fast cooling and heating times • Contamination free calibration of clamp sensors • “Plug and Play” intelligent reference sensors • Easy-to-read color display with User-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software RTC-250 28 to 250°C (82 to 482°F), Dry Block / Liquid Bath **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
Our most advanced and accurate temperature calibrator with the widest available temperature range. One of its great features is the patent pending DLC system for perfect temperature uniformity in the insert – even when calibrating large sensors or many sensors at a time. The RTC Series also feature active dual- and triple-zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -100 to 700°C (-148 to 1292°F) with 6 models • Accuracy to ± 0.04°C and Stability to ± 0.005°C • Dry block and liquid bath / dry block combined • Time saving fast cooling and heating times • Contamination free calibration of clamp sensors • “Plug and Play” intelligent reference sensors • Easy-to-read color display with User-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software RTC-159 -100 to 155°C (-148 to 311°F), Ultra Cooler. **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
Our most advanced and accurate temperature calibrator with the widest available temperature range. One of its great features is the patent pending DLC system for perfect temperature uniformity in the insert – even when calibrating large sensors or many sensors at a time. The RTC Series also feature active dual- and triple-zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -100 to 700°C (-148 to 1292°F) with 6 models • Accuracy to ± 0.04°C and Stability to ± 0.005°C • Dry block and liquid bath / dry block combined • Time saving fast cooling and heating times • Contamination free calibration of clamp sensors • “Plug and Play” intelligent reference sensors • Easy-to-read color display with User-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software RTC-158 -22 to 155°C (-8 to 311°F), Dry Block / Liquid Bath **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
Our most advanced and accurate temperature calibrator with the widest available temperature range. One of its great features is the patent pending DLC system for perfect temperature uniformity in the insert – even when calibrating large sensors or many sensors at a time. The RTC Series also feature active dual- and triple-zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -100 to 700°C (-148 to 1292°F) with 6 models • Accuracy to ± 0.04°C and Stability to ± 0.005°C • Dry block and liquid bath / dry block combined • Time saving fast cooling and heating times • Contamination free calibration of clamp sensors • “Plug and Play” intelligent reference sensors • Easy-to-read color display with User-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software RTC-157 -45 to 155°C (-49 to 311°F), Dry Block. **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
