-
The PTC Series matches lab features like, a wide temperature range, high accuracy, stability, and speed with our well-known, long lasting quality into a single industrial calibrator. Three models are available, from the basic unit to a full model including signal inputs and external reference sensor. The PTC Series features an active dual zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -90 to 660°C (-130 to 1220°F) with 4 models • Accuracy to ± 0.06°C and Stability to ± 0.01°C • Clean Dry block calibrator • Time saving fast cooling and heating times (350° in only 7 minutes) • “Plug and Play” intelligent reference sensors • Easy-to-read color display • Intuitive, fast, user-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software PTC-350 33 to 350°C (91 to 662°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The PTC Series matches lab features like, a wide temperature range, high accuracy, stability, and speed with our well-known, long lasting quality into a single industrial calibrator. Three models are available, from the basic unit to a full model including signal inputs and external reference sensor. The PTC Series features an active dual zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -90 to 660°C (-130 to 1220°F) with 4 models • Accuracy to ± 0.06°C and Stability to ± 0.01°C • Clean Dry block calibrator • Time saving fast cooling and heating times (350° in only 7 minutes) • “Plug and Play” intelligent reference sensors • Easy-to-read color display • Intuitive, fast, user-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software PTC-660 33 to 660°C (91 to 1220°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The CTC Series is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2200°F) with 6 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations CTC-155 A -25 to 155°C (-13 to 311°F) CTC-155 C -25 to 155°C (-13 to 311°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The CTC Series is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2200°F) with 6 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations CTC-350 A 28 to 350°C (82 to 662°F) CTC-350 C 28 to 350°C (82 to 662°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The CTC Series portable temperature calibrator is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2201°F) with 5 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Calibrate Long Sensors with the CTC-652s 190 mm immersion depth • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations • Rugged, portable temperature calibrator **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The CTC Series is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2200°F) with 6 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations CTC-660 A 28 to 660°C (82 to 1220°F) CTC-660 C 28 to 660°C (82 to 1220°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The ETC Series is the ideal dry block temperature calibrator when time is the critical factor and the highest accuracy is not a requirement. The block heats up to 100°C per minute and stabilizes in just 3 minutes! The small size and light weight, fit perfectly in a tool box, making it the perfect field calibrator to verify sensors in difficult to reach places Rugged construction, featuring stainless steel and rubber side panels, make the instrument suitable for many years of service in an industrial environment. • Temperature range from -10 to 400°C (14 to 752°F) with 3 models • Accuracy to ± 0.5°C and Stability to ± 0.05°C • Time saving fast cooling and heating times • Easy-to-read multi-information display • Customizable stability checkmark with countdown timer • Set exact temperature desired to a resolution of 0.1°C • ETC 400R, small lightweight IR calibrator • Lightweight and easy to carry ETC-125A -10 to 125°C (14 to 257°F) ETC-400A 28 to 400°C (82 to 752°F) ETC-400R 28 to 400°C (82 to 752°F)
-
The PK II floating ball type pneumatic dead weight tester is engineered to offer user-friendly, safe operation. The easy-to-use primary standard provides reliable and accurate pressure measurement in the field, or in a lab. • Accuracy to 0.015% of reading • Ranges to 30 psi • Available in psi, g/cm², bar, mbar, kPa, inH₂O, cmH₂O, and mmHg • Small incremental weight sets provide fractional output pressure Featuring a self-regulating design, that allows automatic stabilization of weights, eliminating the need to adjust input pressure. • Rugged ceramic measuring ball • Overhung weight carrier reduces side thrust and friction • Quick-leveling system for field use • Optional TripodLocal gravity and standard gravity (980.665 gals) versions available.**COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
Our Multifunction Process Calibrator combines all your favorite features such as % error calculation, scaling, leak-testing, and switch calibrating into one multifunction process calibrator. • Large full color display • Advanced Simplicity user interface • Simultaneous read-back and fast RTD simulation • Connect an RTD to use as a high accuracy thermometer using “True Ohm” technology • Full numerical keypad with cursor and function keys • Recall saved tasks for both upper & lower windows • Fuseless Protection The multifunctions of the ASC-400 include: • Read and source RTD, Thermocouple, Current, Voltage, Frequency, Resistance, and Pulse Train Output • Calibrate gauge or absolute pressure when combined with an APM CPF pressure module • Calibrate temperature when combined with a dry block calibrator
-
The Type T tester is a dead weight tester that offers laboratory accuracy in an instrument designed to withstand an industrial environment or daily stresses of a manufacturing environment. Each tester features a re-entrant type measuring piston and cylinder assembly. This design reduces the rate of fluid leakage and increases float time, helping to maintain accuracy as test pressures increase. • Accuracy to 0.015% of reading • Ranges to 15,000 psi • Available in psi, kg/cm², bar, and kPa • Small incremental weight sets available. A dual volume pumping feature allows a large volume of fluid to be added at low pressures to fill the system and increase pressure rapidly. Once filled, switch to a smaller volume to easy pumping and provide finer control at higher pressures. • Overhung weight carrier reduces side thrust and friction • Over-pressure protection prevents piston damage • 3- leg design with bulls-eye leveling system • Single and dual column versions available to meet a wide variety of applications **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
-
The T-900 Series pneumatic hand pumps generate pressure and vacuum with precision and ease, allowing users to fine-tune the pressure delivered with every stroke. A built-in relief valve and dual pressure output enable safe and simple operation. The T-965 and T-975 are available with a button valve, making them capable of switching easily from pressure to vacuum generation • Vacuum & Pressure Range: -25 inHg to 30 psi or -27 inHg to 580 psi • Lightweight, compact design • Two outlet ports • Protected shuttle valve • Fine adjust sensitivity to 0.01 psi • Adjustable stroke • T-975-CPF model includes CPF hose and fittings
-
The T-600 Series is a lightweight and portable hydraulic hand pump, specifically designed for high pressure applications. A fine adjust allows precise control of pressure, while a vent valve provides quick and positive shut-off and pressure release. The pumps are compatible with petroleum-based oils or hydraulic fluids. • High Pressure Range: 0 to 5000 psi • Easy to use fine adjust • Two outlet ports • Large reservoir • Eliminate / Bleed air with CPF fittings • T-620H-CPF includes CPF hose and fittings TO ORDER ACCESSORIES AND REPLACEMENT PARTS ONLY SELECT "NONE" FOR YOUR PUMP SELECTION
-
The P-Series (System D) comparators are hydraulic screw pumps designed for easy, controlled, high pressure generation. Each comparator includes a 4 connection manifold, which can be used for the reference indicator, the device under test, a fine adjust, an isolation valve, or a fluid reservoir. The adjustable reference pressure port lets you set your reference gauge at the best viewing angle. Three models are available for hydraulic oil, water, or both. • Pressure Range: 0 to 5000 psi / 350 bar • Easy to use fine adjust • Adjustable reference port • Eliminate / Bleed air with CPF fittings • Portable or permanent bench mounting • P-018-CPF includes CPF fittings
-
The P014 hydraulic jack pump (System E) is an extremely effective pressure pump designed for easy, controlled, high pressure generation. Each comparator includes a 4 connection manifold, which can be used for the reference indicator, the device under test, a fine adjust, an isolation valve, or a fluid reservoir. The adjustable reference pressure port lets you set your reference gauge at the best viewing angle. • Pressure Range: 0 to 10 000 psi / 700 bar • Easy to use fine adjust • Adjustable reference port • Eliminate / Bleed air with CPF fittings • Portable or permanent bench mounting
-
Type T hydraulic comparator (System F) is a self-contained high volume pressure source capable of producing pressure up to 15 000 psi. It is ideal for testing gauges and setting hydraulic relief valves and pressure switches. Multiple models are available for hydraulic oil, water, or both. • Pressure Range: 0 to 15 000 psi • High and low volume settings • Two outlet ports • Large fluid capacity • Fine adjustment up to 3500 psi • Compatible with water and oil • T-1-CPF includes CPF fittings
-
CPF Fittings and Hose are a new line of quick-test pressure fittings for calibration and test applications -- designed with an emphasis on safety. Crystal Pressure Fittings (CPF) perform up to 15 000 psi / 1000 bar, and feature a safety weep hole to alert you before you accidentally disconnect from a pressurized system. It can also be used as a bleed point. Each fitting is machined in 316 Stainless Steel and laser markings indicate the fitting type, size, part number, and Maximum Allowable Working Pressure to prevent a mismatched connection. An industry-first patented o-ring connection allows CPF Fittings to maintain a leak-free seal up to 10 000 psi with only finger-tightening. This offers an alternative to commonly-used NPT Fittings, which require technicians to wrap their fittings in thread tape and use a wrench to tighten each installation. Unlike other quick-change fittings, the O-rings in CPF Fittings are also easily replaceable. CHECK ITEM DESIRED AND CHOOSE QUANTITY TO THE LEFT OF LINE ITEM FOR EACH ITEM THAT IS BEING ORDERED
