Milliamp Loop Calibrator PIECAL 334
PIECAL Model 334 – Just Like an Old Friend
• Calibrate Milliamp Instruments
Source 0.00 to 24.00 mA & -25.0 to 125.0% of 4-20 mA
Read 0.00 to 52.00 mA
Read -99.99 to 99.99 V
Simulate 2-Wire Transmitters; Power & Read 2-Wire Transmitters
• Calibrate with Confidence
Accurate to ±0.025% of Span at 4.00 & 20.00 EZ-CHECK outputs
• Use in the Plant, Field or Shop
Includes Rubber Boot and Attached Test Leads; Low profile switches resist accidental damage
• Simple Battery Changes
Separate compartment for no-tool battery changes with four inexpensive “AA” batteries
• Optional Accessories
AC Adaptor 120V (020-0101); 240V (020-0100); Deluxe Hands Free Carrying Case (020-0211); NiMh Batteries & Charger 120VAC/12V DC (020-0103)
Improvements over 334s from other manufacturers include better longer term stability, accuracy, reliability & ruggedness plus improved battery life. PIECAL 334 is the perfect replacement for your worn out mA calibrators!
Advantages of the PIECAL 334 over the Altek 334 and Altek 334A
• Backlit Display with Larger Digits
Easier to read in dark areas of the plant
• More Resistant to Accidental Damage
Rubber Boot and Stronger Switches
• Separate Battery Compartment with 4 “AA” Batteries
No more removing housing with screwdriver to replace three expensive 9V batteries. Calibration seals remain intact.
• Calibrate More Devices Between Battery Changes
Drives more loop instruments at 24 Volts (up to 1200 Ohms) for entire battery life. The Altek 334 output voltage drops as the batteries run down.
• Includes Certificate of Calibration
All PIECAL Calibrators come with a free signed and dated certificate. Altek’s come only with an unsigned Statement of Calibration Practices with a certificate of calibration available for an extra charge.