Additel 919A Pneumatic High Pressure Test Pump

Description

The Additel 919A Pneumatic High Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 2,000psi (140bar). With a long lever, it just takes 30 seconds to reach 2,000 psi (140 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 0.001 psi (10 Pa , 0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration. A built-in gas-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. The residual liquid in the pump introduced from the devices under test will be collected and then pushed out during pressure release. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The 919A is an ideal comparison test pump for pressure instruments calibration.

• Media:
  Air.

• Generated Pressure Range:
  95% vacuum to 2,000 psi (140 bar) positive pressure

• Adjustment Resolution:
  10 Pa (0.1 mbar/0.0015 psi)

• Material:
  Ram/adapters:SS
Body: SS/aluminum
Seals: Buna-N

• Connection
  Hand-tight connectors for both test gauge and reference gauge.
Test Gauge Connection: 1/4NPT female, 1/2NPT female, 1/4BSP female, or M20X1.5 female
Reference Gauge Connection: 1/4NPT female, 1/2NPT female , 1/4BSP female, or M20X1.5 female

• Dimensions:
  Height:  7.00″ (178 mm);
Base:  21.26″ (540 mm) x 10.63″ (270 mm).

• Weight:
  14.3 lb (6.5 kg).

• Warranty:
  1 year