Ametek

  • Sale!
    The Crystal XP2i is The World’s Most Popular Test Gauge! The Crystal XP2i is Ultra rugged, intrinsically safe, digital test gauge and is available with 0.1% of reading, 0.02% of full scale, or 0.05% of full scale accuracy levels.
  • CPF Fittings and Hose are a new line of quick-test pressure fittings for calibration and test applications -- designed with an emphasis on safety. Crystal Pressure Fittings (CPF) perform up to 15 000 psi / 1000 bar, and feature a safety weep hole to alert you before you accidentally disconnect from a pressurized system. It can also be used as a bleed point. Each fitting is machined in 316 Stainless Steel and laser markings indicate the fitting type, size, part number, and Maximum Allowable Working Pressure to prevent a mismatched connection. An industry-first patented o-ring connection allows CPF Fittings to maintain a leak-free seal up to 10 000 psi with only finger-tightening. This offers an alternative to commonly-used NPT Fittings, which require technicians to wrap their fittings in thread tape and use a wrench to tighten each installation. Unlike other quick-change fittings, the O-rings in CPF Fittings are also easily replaceable. CHECK ITEM DESIRED AND CHOOSE QUANTITY TO THE LEFT OF LINE ITEM FOR EACH ITEM THAT IS BEING ORDERED
  • Calibration tool box in the palm of your hand! The 30 Series is a wide range digital pressure calibrator that fits easily into your shirt pocket. Its internal sensors give you 0.05% of reading accuracy and resist damage from overpressure. • Wide pressure range can measure vacuum and pressure up to 5000 psi (300 bar) • Indicates milliamps to calibrate transmitters • Ultra compact and light • Very easy to learn and use • Battery operated • Brings laboratory accuracy to outdoor field conditions
  • The Ametek Crystal M1 is a digital pressure gauge with 0.2% of reading accuracy. It competes directly with mechanical gauges. Accuracy is not degraded by dropping, over-pressure, rapid pressure changes or temperatures between -10˚C and 50˚C.
  • The T-900 Series pneumatic hand pumps generate pressure and vacuum with precision and ease, allowing users to fine-tune the pressure delivered with every stroke. A built-in relief valve and dual pressure output enable safe and simple operation. The T-965 and T-975 are available with a button valve, making them capable of switching easily from pressure to vacuum generation • Vacuum & Pressure Range: -25 inHg to 30 psi or -27 inHg to 580 psi • Lightweight, compact design • Two outlet ports • Protected shuttle valve • Fine adjust sensitivity to 0.01 psi • Adjustable stroke • T-975-CPF model includes CPF hose and fittings
  • Our Multifunction Process Calibrator combines all your favorite features such as % error calculation, scaling, leak-testing, and switch calibrating into one multifunction process calibrator. • Large full color display • Advanced Simplicity user interface • Simultaneous read-back and fast RTD simulation • Connect an RTD to use as a high accuracy thermometer using “True Ohm” technology • Full numerical keypad with cursor and function keys • Recall saved tasks for both upper & lower windows • Fuseless Protection The multifunctions of the ASC-400 include: • Read and source RTD, Thermocouple, Current, Voltage, Frequency, Resistance, and Pulse Train Output • Calibrate gauge or absolute pressure when combined with an APM CPF pressure module • Calibrate temperature when combined with a dry block calibrator
  • The ETC Series is the ideal dry block temperature calibrator when time is the critical factor and the highest accuracy is not a requirement. The block heats up to 100°C per minute and stabilizes in just 3 minutes! The small size and light weight, fit perfectly in a tool box, making it the perfect field calibrator to verify sensors in difficult to reach places Rugged construction, featuring stainless steel and rubber side panels, make the instrument suitable for many years of service in an industrial environment. • Temperature range from -10 to 400°C (14 to 752°F) with 3 models • Accuracy to ± 0.5°C and Stability to ± 0.05°C • Time saving fast cooling and heating times • Easy-to-read multi-information display • Customizable stability checkmark with countdown timer • Set exact temperature desired to a resolution of 0.1°C • ETC 400R, small lightweight IR calibrator • Lightweight and easy to carry ETC-125A -10 to 125°C (14 to 257°F) ETC-400A 28 to 400°C (82 to 752°F) ETC-400R 28 to 400°C (82 to 752°F)  
  • Wally box gauge replacement! The WT version of the XP2i is designed to replicate the dimensions and pressure connections of the most common test gauges mounted in portable cases. It is a drop in replacement for a Wally Box Pressure Gauge.
  • The CTC Series portable temperature calibrator is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2201°F) with 6 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations • Rugged, portable temperature calibrator ** PRICING BASED ON CONFIGURATION - REQUEST A QUOTE FOR ACTUAL PRICE **
  • The HPC50 handheld pressure calibrator is an intrinsically safe, dual pressure calibrator with options to add an additional two external pressure or temperature modules. The HPC50 pressure calibrator combines the features you love from the HPC40 with improvements like, better battery life an improved display, an extra external module connection, and of course intrinsic safety. The HPC50 series pressure calibrator is fully temperature compensated for pressure, temperature, and electrical measurements from -20 to 50C. • 0.035% of Reading Accuracy • Gauge, Absolute, and Differential Pressure to 15,000 psi / 1000 bar / 100 MPa • Advanced Simplicity "Non-Menu" Interface • Measure Sink mA and V • High Accuracy Thermometer with "True Ohm" Technology • Store & Recall Previously Used Screens Combine the HPC50 Series with any of our ready to use pump systems, to provide a complete calibration kit.
    • Log 500,000 points at up to 10 readings per/s
    • Interactive real-time graphing of measurements
    • Quick-change module bays
      • 15,000 psi (1000 bar, 100MPa) pressure
      • Pt100 RTD temperature
      • Voltage (28VDC), current (55mA), & switch test
    • Switch to absolute pressure with BARO option
    • IP67 rated enclosure & drop tested from 5ft
  • A rugged Wet/Wet Differential! Ultra rugged, intrinsically safe, Differential Pressure Gauge with 0.1% of reading accuracy, capable of continuous vacuum measurement.
  • Fast, portable, and easy – generate pressure to 15 000 psi The GaugeCalHP (System G) is a portable, self-contained, hydraulic pressure generator for calibrating pressure gauges, transmitters, sensors, and safety valves. It’s much faster than deadweight testers and most automated pressure controllers; and it’s so quick and easy to use, it’s ideal for calibrating those low cost gauges that are often overlooked for ISO9000 compliance. • Pressure to 15 000 psi / 1000 bar / 100 MPa • Vacuum to -12.5 psi / -0.8 bar / -86 kPa Use without fluid to generate up to 400 “H2O (995 mbar) to within 0.01 inches (0.025 mbar). Makes calibrating differential pressure transmitters easy. • Easily test large size gauges with the unique pivoting manifold • Quickly bleed air and capture fluid with the no mess drip tray • Gauge-safe integral venting system prevents damage to mechanical gauges • Use with water, light oil, or air
  • Type T hydraulic comparator (System F) is a self-contained high volume pressure source capable of producing pressure up to 15 000 psi. It is ideal for testing gauges and setting hydraulic relief valves and pressure switches. Multiple models are available for hydraulic oil, water, or both. • Pressure Range: 0 to 15 000 psi • High and low volume settings • Two outlet ports • Large fluid capacity • Fine adjustment up to 3500 psi • Compatible with water and oil • T-1-CPF includes CPF fittings
  • The P014 hydraulic jack pump (System E) is an extremely effective pressure pump designed for easy, controlled, high pressure generation. Each comparator includes a 4 connection manifold, which can be used for the reference indicator, the device under test, a fine adjust, an isolation valve, or a fluid reservoir. The adjustable reference pressure port lets you set your reference gauge at the best viewing angle. • Pressure Range: 0 to 10 000 psi / 700 bar • Easy to use fine adjust • Adjustable reference port • Eliminate / Bleed air with CPF fittings • Portable or permanent bench mounting
  • The P-Series (System D) comparators are hydraulic screw pumps designed for easy, controlled, high pressure generation. Each comparator includes a 4 connection manifold, which can be used for the reference indicator, the device under test, a fine adjust, an isolation valve, or a fluid reservoir. The adjustable reference pressure port lets you set your reference gauge at the best viewing angle. Three models are available for hydraulic oil, water, or both. • Pressure Range: 0 to 5000 psi / 350 bar • Easy to use fine adjust • Adjustable reference port • Eliminate / Bleed air with CPF fittings • Portable or permanent bench mounting • P-018-CPF  includes CPF fittings
  • The T-600 Series is a lightweight and portable hydraulic hand pump, specifically designed for high pressure applications. A fine adjust allows precise control of pressure, while a vent valve provides quick and positive shut-off and pressure release. The pumps are compatible with petroleum-based oils or hydraulic fluids. • High Pressure Range: 0 to 5000 psi • Easy to use fine adjust • Two outlet ports • Large reservoir • Eliminate / Bleed air with CPF fittings • T-620H-CPF includes CPF hose and fittings   TO ORDER ACCESSORIES AND REPLACEMENT PARTS ONLY SELECT "NONE" FOR YOUR PUMP SELECTION
  • The Type T tester is a dead weight tester that offers laboratory accuracy in an instrument designed to withstand an industrial environment or daily stresses of a manufacturing environment. Each tester features a re-entrant type measuring piston and cylinder assembly. This design reduces the rate of fluid leakage and increases float time, helping to maintain accuracy as test pressures increase. • Accuracy to 0.015% of reading • Ranges to 15,000 psi • Available in psi, kg/cm², bar, and kPa • Small incremental weight sets available. A dual volume pumping feature allows a large volume of fluid to be added at low pressures to fill the system and increase pressure rapidly. Once filled, switch to a smaller volume to easy pumping and provide finer control at higher pressures. • Overhung weight carrier reduces side thrust and friction • Over-pressure protection prevents piston damage • 3- leg design with bulls-eye leveling system • Single and dual column versions available to meet a wide variety of applications **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • The PK II floating ball type pneumatic dead weight tester is engineered to offer user-friendly, safe operation.  The easy-to-use primary standard provides reliable and accurate pressure measurement in the field, or in a lab. • Accuracy to 0.015% of reading • Ranges to 30 psi • Available in psi, g/cm², bar, mbar, kPa, inH₂O, cmH₂O, and mmHg • Small incremental weight sets provide fractional output pressure Featuring a self-regulating design, that allows automatic stabilization of weights, eliminating the need to adjust input pressure. • Rugged ceramic measuring ball • Overhung weight carrier reduces side thrust and friction • Quick-leveling system for field use • Optional Tripod
    Local gravity and standard gravity (980.665 gals) versions available.
    **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • The CTC Series is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2200°F) with 6 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations CTC-660 A 28 to 660°C (82 to 1220°F) CTC-660 C 28 to 660°C (82 to 1220°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • The CTC Series portable temperature calibrator is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2201°F) with 5 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Calibrate Long Sensors with the CTC-652s 190 mm immersion depth • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations • Rugged, portable temperature calibrator **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**  
  • The CTC Series is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2200°F) with 6 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations CTC-350 A 28 to 350°C (82 to 662°F) CTC-350 C 28 to 350°C (82 to 662°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • The CTC Series is a fast, time-saving, reliable dry block temperature calibrator designed for on-site use. The large color display is easy-to-read and provides icons and information regarding the status of the calibrator and the calibration in process. Popular functions like automatic switch test and auto stepping are available with special one-key-one-function buttons. Speed, portability, cleanliness, and wide temperature range are all superior over liquid bath systems. • Temperature range from -25 to 1205°C (-13 to 2200°F) with 6 models • Accuracy to ± 0.2°C and Stability to ± 0.04°C • Lightweight and easy to carry • Multi-hole and/or insert kits • Input for external reference sensor on all C models • MVI circuitry ensures stability despite mains supply variations CTC-155 A -25 to 155°C (-13 to 311°F) CTC-155 C -25 to 155°C (-13 to 311°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • The PTC Series matches lab features like, a wide temperature range, high accuracy, stability, and speed with our well-known, long lasting quality into a single industrial calibrator. Three models are available, from the basic unit to a full model including signal inputs and external reference sensor. The PTC Series features an active dual zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -90 to 660°C (-130 to 1220°F) with 4 models • Accuracy to ± 0.06°C and Stability to ± 0.01°C • Clean Dry block calibrator • Time saving fast cooling and heating times (350° in only 7 minutes) • “Plug and Play” intelligent reference sensors • Easy-to-read color display • Intuitive, fast, user-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software PTC-660 33 to 660°C (91 to 1220°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • The PTC Series matches lab features like, a wide temperature range, high accuracy, stability, and speed with our well-known, long lasting quality into a single industrial calibrator. Three models are available, from the basic unit to a full model including signal inputs and external reference sensor. The PTC Series features an active dual zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -90 to 660°C (-130 to 1220°F) with 4 models • Accuracy to ± 0.06°C and Stability to ± 0.01°C • Clean Dry block calibrator • Time saving fast cooling and heating times (350° in only 7 minutes) • “Plug and Play” intelligent reference sensors • Easy-to-read color display • Intuitive, fast, user-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software PTC-350 33 to 350°C (91 to 662°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • The PTC Series matches lab features like, a wide temperature range, high accuracy, stability, and speed with our well-known, long lasting quality into a single industrial calibrator. Three models are available, from the basic unit to a full model including signal inputs and external reference sensor. The PTC Series features an active dual zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -90 to 660°C (-130 to 1220°F) with 4 models • Accuracy to ± 0.06°C and Stability to ± 0.01°C • Clean Dry block calibrator • Time saving fast cooling and heating times (350° in only 7 minutes) • “Plug and Play” intelligent reference sensors • Easy-to-read color display • Intuitive, fast, user-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software PTC-155 -25 to 155°C (-13 to 311°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • The PTC Series matches lab features like, a wide temperature range, high accuracy, stability, and speed with our well-known, long lasting quality into a single industrial calibrator. Three models are available, from the basic unit to a full model including signal inputs and external reference sensor. The PTC Series features an active dual zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -90 to 660°C (-130 to 1220°F) with 4 models • Accuracy to ± 0.06°C and Stability to ± 0.01°C • Clean Dry block calibrator • Time saving fast cooling and heating times (350° in only 7 minutes) • “Plug and Play” intelligent reference sensors • Easy-to-read color display • Intuitive, fast, user-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software PTC-125 -90 to 125°C (-130 to 257°F) **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • Our most advanced and accurate temperature calibrator with the widest available temperature range. One of its great features is the patent pending DLC system for perfect temperature uniformity in the insert – even when calibrating large sensors or many sensors at a time. The RTC Series also feature active dual- and triple-zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -100 to 700°C (-148 to 1292°F) with 6 models • Accuracy to ± 0.04°C and Stability to ± 0.005°C • Dry block and liquid bath / dry block combined • Time saving fast cooling and heating times • Contamination free calibration of clamp sensors • “Plug and Play” intelligent reference sensors • Easy-to-read color display with User-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software RTC-700 33 to 700°C (91 to 1292°F), Dry Block. **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • Our most advanced and accurate temperature calibrator with the widest available temperature range. One of its great features is the patent pending DLC system for perfect temperature uniformity in the insert – even when calibrating large sensors or many sensors at a time. The RTC Series also feature active dual- and triple-zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -100 to 700°C (-148 to 1292°F) with 6 models • Accuracy to ± 0.04°C and Stability to ± 0.005°C • Dry block and liquid bath / dry block combined • Time saving fast cooling and heating times • Contamination free calibration of clamp sensors • “Plug and Play” intelligent reference sensors • Easy-to-read color display with User-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software RTC-250 28 to 250°C (82 to 482°F), Dry Block / Liquid Bath **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • Our most advanced and accurate temperature calibrator with the widest available temperature range. One of its great features is the patent pending DLC system for perfect temperature uniformity in the insert – even when calibrating large sensors or many sensors at a time. The RTC Series also feature active dual- and triple-zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -100 to 700°C (-148 to 1292°F) with 6 models • Accuracy to ± 0.04°C and Stability to ± 0.005°C • Dry block and liquid bath / dry block combined • Time saving fast cooling and heating times • Contamination free calibration of clamp sensors • “Plug and Play” intelligent reference sensors • Easy-to-read color display with User-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software RTC-159 -100 to 155°C (-148 to 311°F), Ultra Cooler. **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • Our most advanced and accurate temperature calibrator with the widest available temperature range. One of its great features is the patent pending DLC system for perfect temperature uniformity in the insert – even when calibrating large sensors or many sensors at a time. The RTC Series also feature active dual- and triple-zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -100 to 700°C (-148 to 1292°F) with 6 models • Accuracy to ± 0.04°C and Stability to ± 0.005°C • Dry block and liquid bath / dry block combined • Time saving fast cooling and heating times • Contamination free calibration of clamp sensors • “Plug and Play” intelligent reference sensors • Easy-to-read color display with User-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software RTC-158 -22 to 155°C (-8 to 311°F), Dry Block / Liquid Bath **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • Our most advanced and accurate temperature calibrator with the widest available temperature range. One of its great features is the patent pending DLC system for perfect temperature uniformity in the insert – even when calibrating large sensors or many sensors at a time. The RTC Series also feature active dual- and triple-zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -100 to 700°C (-148 to 1292°F) with 6 models • Accuracy to ± 0.04°C and Stability to ± 0.005°C • Dry block and liquid bath / dry block combined • Time saving fast cooling and heating times • Contamination free calibration of clamp sensors • “Plug and Play” intelligent reference sensors • Easy-to-read color display with User-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software RTC-157 -45 to 155°C (-49 to 311°F), Dry Block. **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**
  • Advanced Pressure Module The APM CPF Series portable pressure modules offer the functionality and flexibility to perform pressure calibrations with a multifunction process calibrator. Or, combine with a hand-held pressure calibrator to expand its range. The APM CPF delivers the same high level accuracy whether in the lab or in the field. • Accuracy to 0.025% of Reading • Temperature Compensated from -20 to 50°C • Integrated CPF Connection • Seven Ranges Available • Rugged Cast Aluminum Housing • Self-Contained, Intelligent Modules
  • Calibration lab in a box! This portable gauge and transmitter calibration system is 7 to 10 times faster than a deadweight tester. It allows you to do a 10 point up and down calibration in less than 3 minutes including printing out a calibration certificate. • Gauge / Chart recorder / Transmitter calibration system • 7 to 10 times faster than a deadweight tester • Reduce transcription / calculation errors • 0.1% of reading accuracy up to 15 000 psi (1000 bar) when using the XP2i as the reference or 0.05% of reading accuracy up to 5000 psi (300 bar) when using the 30 Series as the reference • Easy to use and install, wizards guide you through setup • Includes a weather-proof rolling case that can be used as a portable bench
    Automated Gauge Calibration System.  Pressure Standards are extra.
    Includes GaugeCalHP, FastCalXP, NPT CPF Fittings, Fine Adjust, Footswitch, Carrying Case, USB Adapter, and Rebuild Kit.
  • The HPC40 Series handheld pressure calibrator is the world's first combined pressure and mA loop calibrator to be fully temperature compensated from -20 to 50°C. You can count on the same accuracy whether measuring pressure, current, voltage, or temperature. • 0.035% of Reading Accuracy • Gauge, Absolute, and Differential Pressure to 15,000 psi / 1000 bar / 100 MPa • Advanced Simplicity "Non-Menu" Interface • Measure & Source mA with External Loop Power or Internal 24 VDC Power Supply • High Accuracy Thermometer with "True Ohm" Technology • Store & Recall Previously Used Screens • Flexible Power Options Including Rechargeable Combine the HPC40 Series with any of our ready to use pump systems, to provide a complete calibration kit.
  • Affordably Accurate! Featuring a 3 year recommended calibration interval, DNV approval, and an easy-to-use, time-saving user interface. The m1M digital pressure gauge maintains 0.25% of reading accuracy from -10 to 50°C. Accuracy is not affected by dropping, over-pressure, vibration, temperature, or rapid pressure change. Available as a 30 psi digital manometer. • 3-Year recommended calibration interval • Battery life up to 3 years continuous use • Bright backlit display • Easy to read extra-large numbers • Protective boot included • Shifts everyday wear to a replaceable CPF adapter
  • Our most advanced and accurate temperature calibrator with the widest available temperature range. One of its great features is the patent pending DLC system for perfect temperature uniformity in the insert – even when calibrating large sensors or many sensors at a time. The RTC Series also feature active dual- and triple-zone temperature control which provides excellent temperature homogeneity in the well. • Temperature range from -100 to 700°C (-148 to 1292°F) with 6 models • Accuracy to ± 0.04°C and Stability to ± 0.005°C • Dry block and liquid bath / dry block combined • Time saving fast cooling and heating times • Contamination free calibration of clamp sensors • “Plug and Play” intelligent reference sensors • Easy-to-read color display with User-friendly navigation • Lightweight and easy to carry • Multi-hole insert kits • JofraCal Calibration Software RTC156 Range -30 to 155°C (-22 to 311°F), Dry Block. Use DLC-155. **COST WILL VARY BASED ON CONFIGURATION – PLEASE REQUEST A QUOTE FOR ACTUAL COST**

Title

Go to Top